Page 1 of 1

Adjust Bitmap Rotation

Posted: Tue Jul 01, 2014 4:21 pm
by scot6puk
I have just loaded a bitmap into Qcad but it needs rotating slightly, how do I do this?

Len Cattley

Re: Adjust Bitmap Rotation

Posted: Tue Jul 01, 2014 4:48 pm
by andrew
You can use the Modify > Rotate tool:

- Select the bitmap
- Modify > Rotate
- Click the reference point (or center) for the rotation. This is the point that remains at the same position (for example the approximate start point of a line in the bitmap).
rot1.png
rot1.png (128.9 KiB) Viewed 3735 times
- The rotation dialog is shown. Make sure to click the button with a mouse pointer on it to indicate that you want to rotate using your mouse:
Screen Shot 2014-07-01 at 17.36.50.png
Screen Shot 2014-07-01 at 17.36.50.png (43.06 KiB) Viewed 3735 times
- Click the reference point for the rotation (for example the approximate end point of the same line in the bitmap).
rot2.png
rot2.png (128.46 KiB) Viewed 3735 times
- Click the target point for the rotation (for example a point vertically or horizontally aligned to the center point of the rotation to make a line horizontal or vertical).
rot4.png
rot4.png (128.67 KiB) Viewed 3735 times