I would like to know how to set the Linear Factor. When I go to draw the dimensions its default value is 50 instead of 1, and I must change this value every time I draw a dimension.
Thank you.
How to set the default value of Linear Factor
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: How to set the default value of Linear Factor
Hello Roberto - welcome to the Forum!
With start of any Dimensioning tool an option bar will be shown on top of your drawing. Here you will find the possibility to change the Linear Factor and that is also remembered at the next start of an other dimensioning task or even QCAD.
With start of any Dimensioning tool an option bar will be shown on top of your drawing. Here you will find the possibility to change the Linear Factor and that is also remembered at the next start of an other dimensioning task or even QCAD.
- Husky-2015.11.27-01.png (11.31 KiB) Viewed 4468 times
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: How to set the default value of Linear Factor
If you cannot solve the problem, please attach your drawing file (DXF, DWG), thanks.
Re: How to set the default value of Linear Factor
Thank you. i solved this problem.
Another issue is how to give the correct dimensions to the characters shown in the measure. they appear very very small.
Another issue is how to give the correct dimensions to the characters shown in the measure. they appear very very small.
Re: How to set the default value of Linear Factor
You can adjust the size of dimension labels, arrows, etc under:Roberto wrote:Another issue is how to give the correct dimensions to the characters shown in the measure. they appear very very small.
Edit > Drawing Preferences > Dimension > Dimension Settings