Hi,
On page 32 in the ebook it show on the wall layer
nice thick lines. How do get lines to be that thick?
Wayne
[Edit: Topic moved to correct forum]
Wall Thickness
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: Wall Thickness
Hi Wayne
In the layer list select the layer to edit and change the line weight as you see fit.
In the layer list select the layer to edit and change the line weight as you see fit.
- Edit Layers 1.jpg (21.95 KiB) Viewed 3622 times
- Edit Layers 2.jpg (91.27 KiB) Viewed 3622 times
Re: Wall Thickness
Note that even 2mm might be very thin in the model view if you are creating a floorplan.
The line weight is mainly relevant for printing. A 2mmm line is always printed on paper as 2mm thick, also if you print at a scale of 1:100.
To see how your drawing gets printed, you can switch to print preview:
viewtopic.php?f=47&t=3317
The line weight is mainly relevant for printing. A 2mmm line is always printed on paper as 2mm thick, also if you print at a scale of 1:100.
To see how your drawing gets printed, you can switch to print preview:
viewtopic.php?f=47&t=3317