S.O. ubuntu 14.04
qcad 3.9.4
when I use copy and paste from icon or shortcuts (ctrl+c and ctrl+v) in the same drowing or between two drawing the entities paste scaled of 0.03. I use qcad in two computer (work and home) with the same S.O. and only one have this problem.
mitch37
(solved) copy and paste scaling the entities
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
(solved) copy and paste scaling the entities
Last edited by mitch37 on Wed May 27, 2015 11:23 am, edited 1 time in total.
Re: copy and paste scaling the entities
Please check the options tool bar when pasting. It allows you to scale, rotate, mirror entities while pasting:
Make sure that the scale factor is 1 or reset all options to default (1:1, no rotation, no mirroring) by clicking the reset button at the right.
Note: when copying / pasting between different drawings, the drawing unit is taken into account. I.e. copying a 10 unit long line from a drawing in Millimeters to a drawing in Centimeters results in a 1 unit long line.
- Screen Shot 2015-05-27 at 10.38.48.png (27.33 KiB) Viewed 3743 times
Note: when copying / pasting between different drawings, the drawing unit is taken into account. I.e. copying a 10 unit long line from a drawing in Millimeters to a drawing in Centimeters results in a 1 unit long line.
Re: copy and paste scaling the entities
ok, i don't see the scale factor of the paste. I solved
thanks
mitch37
thanks
mitch37