Hi Peeps,
i'm fairly new to this whole CAD thing, but I'm tired of having to ask other people to help me out. So here's my problem, sorry for the long explanation, my technical english isn't that good.
I need a Ring, 600mm OD, 500mm ID. Since Laser Cutting would be to expensive for the first to third prototype/machine I'd like to make it from flat stock, welded together. It has to be machined anyways on the mill, so that's no prob.
I have drawn the Ring (two circles, thats NOT the problem ) and drawn a line on the horizontal plane between the two circles. Now I used Copy and Rotate to generate 7 additional lines (so this results in 45 Degree cuts between the pieces, 360/8=45). Now I have drawn a line between the intersections on the ID of the Ring. How can I generate the lines on the outside parallel to those on the ID, connect them with the lines representing the angle and measure the outer length and the width of the needed flat stock?
I think that it's fairly easy, and I imagine I could do it in my old AutoSketch 1.0 for Windows (Boy, time goes by..) but I'm lost in QCad
If it isn't understandable what I wrote, please tell me so and I'll try my best to explain!
Marc
Draw lines equally spaced around a ring
Use this forum to ask questions about how to do things in QCAD 2.1/2.2.
Moderator: andrew
Return to “QCAD 2.1/2.2 'How Do I' Questions”
Jump to
- General
- ↳ Announcements
- ↳ Chat
- ↳ Site Feedback
- ↳ Pre-sales Questions
- ↳ Introduce Yourself
- QCAD Professional Version
- ↳ QCAD 'How Do I' Questions
- ↳ QCAD Suggestions and Feedback
- ↳ QCAD Voting Corner
- ↳ QCAD Troubleshooting and Problems
- ↳ QCAD Installation and Upgrades
- ↳ QCAD Programming, Script Programming and Contributing
- ↳ QCAD 'Script Add-On & Plug-in challenge' - Work in Progress
- ↳ Finished 'Ready to go' Scripts/Plug-in's
- ↳ QCAD Tips and Tutorials
- ↳ QCAD/CAM
- ↳ What do you use QCAD/CAM for?
- QCAD Community Edition
- ↳ QCAD Community Edition
- International Forums
- ↳ Français
- ↳ QCAD Professional
- ↳ QCAD/CAM
- ↳ QCAD Community Edition (Version 3)
- ↳ Deutsch
- ↳ QCAD Professional
- ↳ QCAD/CAM
- ↳ QCAD Community Edition
- ↳ Italiano
- ↳ QCAD Professional
- ↳ QCAD/CAM
- ↳ QCAD Community Edition
- ↳ Español
- ↳ QCAD Professional
- ↳ QCAD/CAM
- ↳ QCAD Community Edition
- ↳ Português
- ↳ QCAD Professional
- ↳ QCAD/CAM
- ↳ QCAD Community Edition
- QCAD Book
- ↳ QCAD - An Introduction to Computer-Aided Design
- ↳ QCAD - Una Introducción al Diseño Asistido por Ordenador
- ↳ QCAD - Eine Einführung in computerunterstütztes Zeichnen (CAD)
- QCAD Part Libraries
- ↳ General
- ↳ Creating DXF/DWG items
- ↳ Creating SVG items
- ↳ Meta Data
- dxflib
- ↳ dxflib Suggestions and Feedback
- ↳ dxflib 'How Do I' Questions
- ↳ dxflib Troubleshooting and Problems
- Archive
- ↳ vec2web Format Converter
- ↳ vec2web Suggestions and Feedback
- ↳ vec2web 'How Do I' Questions
- ↳ vec2web Troubleshooting and Problems
- ↳ QCAD Development
- ↳ Translations
- ↳ QCAD Professional (2.1/2.2)
- ↳ QCAD 2.1/2.2 Suggestions and Feedback
- ↳ QCAD 2.1/2.2 'How Do I' Questions
- ↳ QCAD 2.1/2.2 Troubleshooting and Problems
- ↳ QCAD 2.1/2.2 Installation and Upgrades
- ↳ QCAD 2.1/2.2 Developers
- ↳ QCAD Community Edition (2.0)
- ↳ QCAD Community 'How Do I' Questions
- ↳ QCAD Community Patches
- ↳ CAM Expert
- ↳ Announcement
- ↳ CAM Expert Suggestions and Feedback
- ↳ CAM Expert 'How Do I' Questions
- ↳ CAM Expert Troubleshooting and Problems
- ↳ Annonces
- ↳ Ankündigungen
- ↳ Annunci
- ↳ Noticias