Complex Linetypes in CAM Output

Discussions around the CAM Add-On of QCAD.

Moderator: andrew

Forum rules

Always indicate your operating system and QCAD version.

Indicate the post processor used.

Attach drawing files and screenshots.

Post one question per topic.

Post Reply
User avatar
srl
Full Member
Posts: 65
Joined: Tue Aug 09, 2011 4:40 am

Complex Linetypes in CAM Output

Post by srl » Fri Mar 13, 2015 6:49 am

HI Andrew

Now I have a problem with the [CAM] screen in 3.9. as well as new untitled screens.
All the extra linetypes are missing in the propery editor. All is fine in the main screen beside it that produced it.But it was saved from 3.8- I tried all the view options.
Colours still work with my config file just none of my special offset lines. :cry:

linux 64. also with gcode.js

srl

User avatar
andrew
Site Admin
Posts: 9037
Joined: Fri Mar 30, 2007 6:07 am

Re: Complex Linetypes in CAM Output

Post by andrew » Fri Mar 13, 2015 12:44 pm


User avatar
srl
Full Member
Posts: 65
Joined: Tue Aug 09, 2011 4:40 am

Re: Complex Linetypes in CAM Output

Post by srl » Mon Mar 16, 2015 5:59 am

Thanks Andrew

All working again..
cam.png
cam.png (71.15 KiB) Viewed 7857 times
Produced from this drawing.
cam2.png
cam2.png (70.57 KiB) Viewed 7857 times
On the Sim
crop3.png
crop3.png (105.21 KiB) Viewed 7857 times


Here is the Gcode
ramp.ngc
(2.38 KiB) Downloaded 614 times
ramp.ngc
(2.38 KiB) Downloaded 614 times
Still testing my config.
srl

Post Reply

Return to “QCAD/CAM”