Hi,
I don't want to work with the grid, in my mind, it's not very useful, this can produce an honest mistake and i think that slow down the display. I have deactivate the grid display but qcad continues to snap the grid (and i think qcad continues to calculate the grid spacing). I don't find the option, but I seem to recall that in the preceding versions that can possible.
The second suggestion is to produce an option with a zoom speed.
Thanks for your soft.
Baptiste - the French guy with bad English
two questions or suggestions
Moderator: andrew
-
- Newbie Member
- Posts: 4
- Joined: Tue Feb 21, 2012 9:48 pm
Re: two questions or suggestions
Hi chapuis.ecb and welcome.chapuis.ecb wrote:Hi,
I don't want to work with the grid, in my mind, it's not very useful, this can produce an honest mistake and i think that slow down the display. I have deactivate the grid display but qcad continues to snap the grid (and i think qcad continues to calculate the grid spacing). I don't find the option, but I seem to recall that in the preceding versions that can possible.
The second suggestion is to produce an option with a zoom speed.
Thanks for your soft.
Baptiste - the French guy with bad English
In the main menu > Snap > you will find various snap options to set. De-select the Grid option for example and select the End option and you will find you will be "snapping" to the ends of entities.
Example
1.Select Line Tools (keycode WL).
2.Line from 2 points (LI).
3 You will then be presented with Snap options to choose from.
4.You could use the Free (+ sign) as an aid to change between snap options.
5.Selecting Autosnap will snap to the most common snaps -Grid, Intersection, Middle and end of entities.
Your suggestion of an option with a zoom speed can be added here:
http://www.ribbonsoft.com/bugtracker/
You can use this for bugs and feature requests. Note -you will need to register to use it.
Hope this helps
-
- Newbie Member
- Posts: 4
- Joined: Tue Feb 21, 2012 9:48 pm
-
- Newbie Member
- Posts: 4
- Joined: Tue Feb 21, 2012 9:48 pm