Workaround Tip - Print only a selected area of a drawing.

Tips and tricks you want to share with other users. Tutorials, user submitted documentation, etc.

Moderator: andrew

Workaround Tip - Print only a selected area of a drawing.

Postby Clive » Fri Apr 27, 2012 3:28 pm

This ‘Workaround’ tip is based on Andrews post –

viewtopic.php?f=32&t=1861

To print only a selected area of a drawing – (method works on black/or white background)
The original drawing ‘crazy mess’ was drawn on 5 layers of different colours.

Method:
1.Create drawing on your designated layer (1st image).
2.Create new layer – ‘overlay’ with colour set to white.
3.Working on layer overlay – draw a polyline/rectangle around only the area you want to print.
4.Draw another polyline/rectangle around the whole drawing.
5.Select both polylines/rectangles and from main menu > Draw > Hatch > create a solid fill
(2nd Image).

*Note you may need to move this layer to the front – Modify > Bring to front.

6. Switch to print preview and adjust the scale/offset (you can temporarily turn off layer overlay
If you need to).
Make sure that white is printed as white and not black – Edit > Preferences > Graphics View and untick -
'Auto correct black and white colours '.

*This is important otherwise you will get a black overlay instead of white.
Attachments
Crazy mess 1.jpg
Crazy mess 1.jpg (85.63 KiB) Viewed 2892 times
crazy mess 2.jpg
crazy mess 2.jpg (28.24 KiB) Viewed 2892 times
Crazy mess 3.jpg
Crazy mess 3.jpg (65.31 KiB) Viewed 2892 times
User avatar
Clive
Moderator
 
Posts: 822
Joined: Thu Aug 25, 2011 9:28 pm
Location: UK

Re: Workaround Tip - Print only a selected area of a drawing

Postby andrew » Fri Apr 27, 2012 3:35 pm

Excellent, very complete.
Thanks for the post (and the artwork :D)!
User avatar
andrew
Site Admin
 
Posts: 2379
Joined: Fri Mar 30, 2007 6:07 am


Return to QCAD 3 Tips and Tutorials

Who is online

Users browsing this forum: No registered users and 2 guests