How do I create an ellipse in an Isometric Projection ...

Use this forum to ask questions about how to do things in QCAD version 3

Moderator: andrew

How do I create an ellipse in an Isometric Projection ...

I tried to design an ellipse with QCAD Tools - but I stuck .... maybe someone has an easy solution for me

Case: Imagine a model wall build with round dowels - like a Blockhouse,
Now I have to cut the top round dowels under 30° to get a gable shape,
In an isometric this cut has to appear like an ellipse on both sides,
Right side was easy to do with QCAD - maybe not absolutely correct but good enough
Left side .... a disaster I have no idea how I can make it correct looking

Husky-2013.06.30-01.png (7.76 KiB) Viewed 3905 times

A square dowel shape is used as the construction base in the isometric.

I know how to design a correct ellipse step by step - that is not what I'm looking for! I'm looking for a fast and "just good enough looking" solution in QCAD!
Any Ideas?

Iso Ellipse.dxf
(86.63 KiB) Downloaded 186 times

Husky
Moderator

Posts: 944
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: How do I create an ellipse in an Isometric Projection ..

Hi Husky
Do you mean something like this ?

Dowel example.png (2.8 KiB) Viewed 3894 times
Clive
Moderator

Posts: 1092
Joined: Thu Aug 25, 2011 9:28 pm
Location: UK

Re: How do I create an ellipse in an Isometric Projection ..

YES! Nice!!! How??? I'm to dummzumzum!

Husky
Moderator

Posts: 944
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: How do I create an ellipse in an Isometric Projection ..

Well, ideally we need some additional options in the ellipse tools to produce something like this easily!

So... for me I didn't use the ellipse tool, I instead used the Spline (control points - sp) tool, which to be honest with an 'oblique' rectangle as you have here, is a lot easier to achieve something that resembles an elliptical shape.

This is how I done it - it's not straight forward but it does get the job done for now.
1.First make a grid.
2.Use the Spline tool (control points) and fit to the grid intersections.
3.Copy and paste the rest where you need them.

elliptical shape.png (52.36 KiB) Viewed 3868 times
Clive
Moderator

Posts: 1092
Joined: Thu Aug 25, 2011 9:28 pm
Location: UK

Re: How do I create an ellipse in an Isometric Projection ..

Nice, thanks a lot! The grid was the trick

clive wrote:Well, ideally we need some additional options in the ellipse tools to produce something like this easily!

Yep - that would be nice! But I'm sure - we have just to sit tight ...

Husky
Moderator

Posts: 944
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: How do I create an ellipse in an Isometric Projection ..

Husky wrote:Yep - that would be nice! But I'm sure - we have just to sit tight ...

And here it is!

The new QCAD update - 3.2.1 - has a new tool what solves problems like this with just a few mouse-clicks. Perfect!!!

The new tool is called:
"Ellipse: Inscribed in quadrilateral (tangential to four lines) (EQ)"

Husky-2013.08.16-07.png (3.85 KiB) Viewed 3649 times

You have to try it by yourself!

Husky
Moderator

Posts: 944
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: How do I create an ellipse in an Isometric Projection ..

Husky wrote:You have to try it by yourself!

' Yippe kay yay'
Yes what an excellant tool, I've been playing around with it...so very useful, especially for isometric work
Have you also noticed the extra Circle 'geometry' tools:
Main menu > Misc > Drawing...

Misc > Drawing .png (18.66 KiB) Viewed 3599 times
Clive
Moderator

Posts: 1092
Joined: Thu Aug 25, 2011 9:28 pm
Location: UK

Re: How do I create an ellipse in an Isometric Projection ..

clive wrote:Have you also noticed the extra Circle 'geometry' tools:

Yes I have - but the absolute winner for me is:
Modification tools: Clip selection to rectangular area.

Husky-2013.08.27-03.png (15.49 KiB) Viewed 3540 times

Be a little creative, play in combination with this tool also with the clipboard and you can see how powerful this tool is!!!

Husky
Moderator

Posts: 944
Joined: Wed May 11, 2011 9:25 am
Location: USA

Return to QCAD 3 'How Do I' Questions

Who is online

Users browsing this forum: No registered users and 0 guests