QCAD Changelog / 3.3.2 (2013/09/24)
"Support for block attributes in part library items"
I tried this new feature - but I'm struggling with that
I saved a block (already existing) title-block with attributes in my library - insert this block in a new drawing - and all attribute reference points are messed up. Looks like they are scaled by a different factor ...
If I check the text (Attribute) position in the block edit modus .... everything seems to be fine. What I'm doing wrong?
Block edit modus:
Model_space modus:
How to use block attributes in part library's ...
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Re: How to use block attributes in part library's ...
Thanks for the report. Can you attach the library item file? Thanks.
Re: How to use block attributes in part library's ...
Certainlyandrew wrote:Thanks for the report. Can you attach the library item file? Thanks.
Re: How to use block attributes in part library's ...
I tested a little more - my guess is it is a "Drawing unit" problem.
Same unit works - different units are not ...
Same unit works - different units are not ...
Re: How to use block attributes in part library's ...
Yes, you're right. Attributes are not scaled according to units. I will look into that:
http://www.qcad.org/bugtracker/index.ph ... ask_id=931
A workaround is to synchronize after insertion:
Block - Attributes - Synchronize Attributes
http://www.qcad.org/bugtracker/index.ph ... ask_id=931
A workaround is to synchronize after insertion:
Block - Attributes - Synchronize Attributes
Re: How to use block attributes in part library's ...
Thank's Andrew!