toolsnglue wrote:I'd like to see how difficult it would be to write some functions that would create a tool-path from a selected object. For example, if I wanted to cut a 1 inch square from a piece of sheet using a 0.125 inch end mill, I'd have to draw a line on each edge of the square offset by 0.0625 (radius of end mill to be used) Then, I'd want to connect each of those lines by an arc of radius 0.0625 whose center is the corner of the 1 inch square. That object, consisting of four lines and four arcs is the tool path which I'd want to convert to G-Code.
toolsnglue wrote:Has anyone working using QCAD written scripts that provide that functionality? Also, If that square was to be cut from 0.25 inch thick material using my Sherline mill, I'd probably want to make several shallow cuts around the object, and then complete it with a finishing cut the complete 0.25 inch. Again, this might be accomplished with a script that could be customized to each object. Has anyone written any scripts to provide that functionality?
Users browsing this forum: Yahoo [Bot] and 1 guest