[solved] Polyline - Trim Segments Command Broken
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
[solved] Polyline - Trim Segments Command Broken
it appears that there's a bug in version 3.4.5 which causes the program to crash when executing the OT (Polyline - Trim Segments) command. I've tried it a number of times and it crashes every time.I either click on the icon to start the command or enter O T on the command line, then click on an existing polyline segment. After the first click the program freezes and shortly thereafter crashes. I can provide a crash report if that's useful.
John
Re: Polyline - Trim Segments Command Broken
Welcome John
I cannot reproduce this problem on my system, is this a drawing done with QCAD or an imported file from another program?
Are you able to submit an example file here on the forum for testing?
I cannot reproduce this problem on my system, is this a drawing done with QCAD or an imported file from another program?
Are you able to submit an example file here on the forum for testing?
For the best support please state your operating system, QCAD version and add any supporting DXF/DWG files, screenshots etc...
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
Re: Polyline - Trim Segments Command Broken
Hi Clive. Yes, this is a QCAD-originated drawing. In fact, it's just non-sensical stuff I've been drawing while working through the manual, as you'll see when you load it up! I marked one of the polylines that causes the program to crash. Hope this helps.
- Attachments
-
- Drawing Tools.dxf
- (175.5 KiB) Downloaded 537 times
John
Re: Polyline - Trim Segments Command Broken
Hi John,
I tried what you said an got no crash, the polyline trimmed as expected, (win7/64), there must be some other cause...I used the trim icon though, not the keyboard command.
I tried what you said an got no crash, the polyline trimmed as expected, (win7/64), there must be some other cause...I used the trim icon though, not the keyboard command.
JJ Win7 pro-64
Re: Polyline - Trim Segments Command Broken
Well John, I get the same result as J-J...no problems.
Your using QCAD on an iMac I believe, may Andrew or someone else who is using Mac can test this - as on Windows I think its okay!
Your using QCAD on an iMac I believe, may Andrew or someone else who is using Mac can test this - as on Windows I think its okay!
For the best support please state your operating system, QCAD version and add any supporting DXF/DWG files, screenshots etc...
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
Re: Polyline - Trim Segments Command Broken
Yes, I'm am using the Mac version of the program on my iMac. Perhaps the problem is only with the Mac version?
John
Re: Polyline - Trim Segments Command Broken
Same with XP/32 - I tried Icon and Command - no crash!J-J wrote:Hi John,
I tried what you said an got no crash, the polyline trimmed as expected, (win7/64), there must be some other cause...I used the trim icon though, not the keyboard command.
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
Re: Polyline - Trim Segments Command Broken
Tried it with the icon - still crashes. Someone really needs to try this on the Mac version. Apparently the Windows version is working properly.
John
Re: Polyline - Trim Segments Command Broken
Thanks for the details. This is indeed a problem that only occurs with the Mac OS X package which still uses an older compiler (gcc 4.2.1). The problem has been fixed for the upcoming QCAD 3.4.6 release.
Bug report:
http://www.qcad.org/bugtracker/index.ph ... sk_id=1018
Bug report:
http://www.qcad.org/bugtracker/index.ph ... sk_id=1018
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
Re: Polyline - Trim Segments Command Broken
Thanks for the follow up Andrew. I'll test it again in the next release. Thanks all!
John
-
- Active Member
- Posts: 33
- Joined: Sun Jun 23, 2013 2:02 am
Re: Polyline - Trim Segments Command Broken
Just to let everyone know, including Andrew, that I recently updated to the newest release, 3.5.1, and the command now works properly. Thanks all!
John