QCAD Bugtracker

Ruler ticks are not corresponding to the grid points,
Ruler will completely disappear at a certain zoom level,

Settings:
Drawing unit: inch,
Grid settings: Grid 1, Meta Grid 12,
Dim Label Format: “Engineering, 0’-0.0”

see topic below:
http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3014

I have created a drawing, where the CENTERS of the most outer lines have a distance of 3.06mm in both X and Y.
The line weight of these outer lines is 0.6mm, so the whole image is 3.06mm + 2* 0.6mm/2 = 3.12mm wide and long (center to center plus half of the line weight on every side).
Additionally in the export there is a frame around the image, making it 3.12 + 2*frame.
The export function however calculates 3.06mm when setting the resolution to 1000Pix/cm, so it does not include the line weights and the outer frame.

Being able to fill an area with a bitmap would be a nice addition to the already impressive feature list of QCAD.

... would be nice.

If I use the Info tool “Polygonal area” with the option “Add measurement to the drawing” I always have to edit the Value to make clear that we now looking to an area value like m² or ft².

I was thinking that a pre labeling (prefix/postfix) like the normal Dim tools could save me a couple extra steps ...

These are the versions Ubuntu 14.04 comes with, and since it’s an LTS version, it will linger around a while.

(Despite the fact that the Qt4 packages are versioned 4.8.5, qmake –version says 4.8.6, so it doesn’t find the 4.8.5 bindings.)

Thanks,

We do not have a Radian measure tool but we can change the labeling of a Angular Dimensioning ...

It would be nice to have a “Radian measure symbol” in the Property Editor / Geometry / Label / Insert Symbol List.

In the same way as the Pen tool has a drop down menu, would it be possible to have an option to configure the layer list in the same way. I am trying to create a bit more drawing space and it would be good if I could dock the layer list in the top of my window and only take up a single row space!

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

Many times I’m faced with the situation that I have to use a rectangle related to other entities. Dimensions/Angle = unknown.

We have in QCAD a rectangle tool with a two point diagonal determination but this is limited to two points and it will only work in a horizontal and vertical direction.

My feature request is based on the idea to draw a rectangle with 3 points - regardless the angle.

1. First point: start

2. second point: determination of the first side (width?) and it will also provide the angle for the rectangle

3. third point: determination second side (height?)

I’m asking for an additional new tool? No - just as an option to the existing rectangle tool ...

It would be nice to have the Selection Filter also present in the Menu / Selection List

Arrange points on a plan according to an arithmetical, geometrical, logarithmic, customizable variation of distances

It would appear that when QCAD imports a DXF, it reorders the layers into alphabetical order (at least when importing R2011). I have not tested this extensively but on other programs, the order is different from alphabetical. Ideally the operator should be given a choice to order the layers as exported (assuming the DXF format remembers that) or alphabetical. This is because a drawing may have a certain stack up of layers (like a printed circuit board) and then alphabetic ordering is not useful nor desired.

Git head as well as 3.4.5 (trial), both with dxflib 3.3.4.0.

Start up QCAD, (with existing or new configuration, doesn’t seem to matter), “Save as” the completely empty drawing, choose “R15 (dxflib)” on Pro (only this one is available on community), save drawing.

Fire up AutoCAD 2000, try to load the empty drawing just saved.

Result:

DXF read error
Error in APPID Table
DXF read error on line 941.
Invalid or incomplete DXF input -- drawing discarded.

Problem not present when a completely empty drawing saved using Teigha in R15 format is opened (ie. it just results in an empty drawing in AutoCAD 2000). Problem is also not present when saving an existing drawing with Pro (trial) with Teigha and opening it in AutoCAD 2000. Problem does present when trying to open a dxflib-saved drawing in AutoCAD 2000.

Empty drawings created with both dxflib 3.3.4.0 in QCAD Pro 3.4.5 trial and Teigha whatever in QCAD Pro trial 3.4.5 are attached. (Community Git 135fd0 is identical to Pro - same dxflib version.)

According to the help, one requires a middle mouse to pan. Since few standard mice have middle buttons, this is a poor choice for this all important function. The default should be the right mouse button when ever the mouse is placed in an open area with nothing else to select. That way right click can still be used to invoke a pop down menu when ever the mouse is placed over an object that might have a need for pop down menu options. Additionally, the Pan mouse key should be alterable and selectable from a Preferences option, since if one does have a three button mouse, we should not prevent a user from employing this hardware if they have it. The same might be said for all mouse buttons to allow the user to configure the mouse operation to that which is most comfortable and efficient for their tasks.

Add a button to edit the block beside the block combo box that is shown when showing the properties of a block reference.

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

Property Editor - Geometry - Custom - Add Custom Property

It would be nice to have in “Application preferences” the possibility to predefine a couple Custom Property Names.
Right now I use the Custom Property function to add a DIN and the Material info to every Block. This project has a lot of DIN parts and I have to type again and again the names DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... DIN ... Material ... you got my point

If I have predefined Names - I have just to fill out the value

It would be useful to have an additional option to only detect duplicates on user defined selection of drawing.
Please see topic:
http://www.qcad.org/rsforum/viewtopic.php?f=32&p=9145#p9145

Isometric Projection used on a selection which contains blocks will mix up the layer affiliations.
No blocks - no problems

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

See:
http://www.qcad.org/rsforum/posting.php?mode=reply&f=30&t=2677

It would be nice (and a time-saver!) to have an additional option in the alignment tool: Distribute entities / blocks equally.

It would be useful to be able to pick a Start and End point of an Arc within a Circle to then break this out. So in principle another break out tool.

Please see topic:http://www.qcad.org/rsforum/viewtopic.php?f=33&p=8826#p8826

Add the option to use a fixed path for the save to, open and CAM export directories.

(G code files are usually saved in on directory that the Control Program opens them up from so this would save a ton of mouse clicking)

See drawing: I can’t seem to be able to manually change to the “To” variants – that is, override the decision of the label/arrow placement engine.

The circle in the attachment is a borderline example of when even just in this form I would more like it on the outside. If the drawing is crowded in that area, it would be even more useful to have it the other way around.