|
1363 | QCAD (main) | Feature Request | Low | New Tool - make lines horizontal or vertical | Assigned | |
|
Task Description
New Tool Request:
To have a tool to make any given line which is ‘not’ orthogonal already into an orthogonal line.
For example if I had a line at 30 degrees by using the tool I could change the line to be either horizontal or vertical.
|
|
1368 | QCAD (main) | Suggestion | Low | Context Menu - suggestions | Assigned | |
|
Task Description
I love using the context menu, speeding up my workflow indeed.
I would like to suggest that we have the added option to show only icons if desired and also that maybe an option to save and show commonly used tools!
Maybe the context menu could be configurable to show two columns, one for the normal last used tools and the othjer one for the user saved tools?
What do you think?
|
|
1371 | QCAD (main) | Feature Request | Low | Matrix - Modify, missing Flip Horizonatal and Vertical ... | Assigned | |
|
Task Description
Matrix - Modify, add Flip Horizonatal and Vertical tools
|
|
1373 | QCAD (main) | Feature Request | Low | Line From Angle - additional option to select exisitng ... | Assigned | |
|
Task Description
Often I find myself clicking on an existing line to determine the angle from the property editor, then copying and pasting this info into the angle field, it would be so very useful to have an additional option in the ‘Line from Angle’ tool to be able to pick an existing entity which would automatically register and fill in the angle for me,then all I would need to do would enter the length required.
|
|
1402 | QCAD (main) | Feature Request | Low | CAD-Toolbar, Toolbar, Menu, Tool Matrix with customized... | Assigned | |
|
Task Description
Would it be possible to arrange the Menu, CAD-Toolbar, Toolbar, Menu, Tool Matrix with customized keywords, like “simple”, advanced” and “expert” to show only a minimum for user there are begin with CAD, advanced for CAD-User, and expert for construction.
|
|
1445 | QCAD (main) | Bug Report | Low | Switching off grid scaling can break rulers | Assigned | |
|
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=4314
|
|
1505 | QCAD (main) | Feature Request | Low | New feature - use info tools with scale | Assigned | |
|
Task Description
When using the info tools, like the point to point measure it would be useful to be able to select a scale as well.
For example, when I scale a drawing say to 1:20, when working on the scaled drawing I can measure accurately with the measure tool in 1:20 also, without having to keep refering to the 1:1 drawing.
Regards
Clive
|
|
1510 | QCAD (main) | Feature Request | Low | dimensioning, rounded values | Assigned | |
|
Task Description
Approximation value for dimensioning, i.e. for example: approximate to .5 measured valure 11.3456 > displayed value 11.5
|
|
1549 | QCAD (main) | Feature Request | Low | Separate Coordinate Display from Drawing Dimensions | Assigned | |
|
Task Description
Source: https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752
According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.
|
|
1586 | QCAD (main) | Feature Request | Low | Edit > Application Preferences: Use different color for... | Assigned | |
|
Task Description
Add preference to use a single, configurable color for all locked layers.
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=4879#p17953
|
|
1594 | QCAD (main) | Feature Request | Low | Tool matrix: allow reordering of tools | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923
|
|
1601 | QCAD (main) | Feature Request | Low | Add regex to text search & replace | Assigned | |
|
Task Description
Add a more versatile way of doing a search and replace for text. Regular expressions maybe?
|
|
1621 | QCAD (main) | Feature Request | Low | New Drawings in Draft Mode | Assigned | |
|
Task Description
See: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=5001
|
|
1629 | QCAD (main) | Feature Request | Low | Add additional Option to Angelur DIM Tool | Assigned | |
|
Task Description
Please see:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4956
|
|
1632 | QCAD (main) | Feature Request | Low | Option to add bespoke dimension precision + tolerance s... | Assigned | |
|
Task Description
Hi Andrew,
1. I cannot find a way of selecting individual dimensions and changing the precision lets say from 0.00 to 0.000 for these particular dimensions only without affecting all the rest of the dimensions in the drawing - could an option be added for doing this in the property editor or not?
2. Would it be possible to add an option in the drawing preferences so that automatically a symbol is added at the correct placement fo all dimensions, in this case a tolerance plus/minus symbol?
Many thanks
Clive
|
|
1645 | QCAD (main) | Feature Request | Low | Add warning when opening file with 3D content | Assigned | |
|
Task Description
Hi.
I’m working currently a lot with files coming from rhino. Qcad can open them properly any also most operations on them work as usual - except the selection methods.
box select from upper left to lower right works as usual. double click to select all connected entities is broken. (only one entity is selected). box select from lower right to upper left does not select entities touching the selection box. (nothing is selected)
on mac os nothing is selectable with single click. on linux single click sometimes fails (nothing is selected after clicking on a line).
thanks for looking into this :)
Martin
|
|
1647 | QCAD (main) | Feature Request | Low | Add point / dot option for leaders | Assigned | |
|
Task Description
Hi Andrew,
Hopefully you might be able to squeeze this one around your busy schedule.
Would it be possible to add in the property editor an option to change a dimension arrow to a point / filled dot and maybe also a tick?
I see you are working on some viewport stuff, I am very much looking forward to testing some of this out ;).
Many thanks
Clive
|
|
1649 | QCAD (main) | Feature Request | Very Low | Add configuarable format options for saving blocks to l... | Assigned | |
|
Task Description
Add configuarable format options in application preferences for saving blocks to library to either dxf or dwg.
|
|
1651 | QCAD (main) | Feature Request | Low | Change thickness of arch tick for dimensioning | Assigned | |
|
Task Description
An option in the drawing preferences to change the line thicknesses for arch ticks would be a huge plus, at the moment I am having to insert ‘arch tick’ blocks for this.
|
|
1666 | QCAD (main) | Feature Request | Low | Draw > Line > Relative Angle / Orthogonal: define lengt... | Assigned | |
|
Task Description
Add option to define length (end point) using mouse pointer.
If reference point is “Middle”, extend line from middle in both directions to mouse cursor (?).
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=5205
|
|
1676 | QCAD (main) | Feature Request | Low | Modify > Explode: explode lines / arcs with line patter... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4333
|
|
1678 | QCAD (main) | Suggestion | Low | Property Editor dialog | Assigned | |
|
Task Description
The line for “General properties”, “Layer” the line is too narrow, so you do not see the layer name when the Property Editor is pinned to the side. (see Forum - Suggestions and Feedback): https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5239
|
|
1681 | QCAD (main) | Feature Request | Low | Auto-dimensioning | Assigned | |
|
Task Description
You can apply the command to Lines, PolyLine segments, Arcs, Circles, and Rings:
For linear entities parallel to an axis of the coordinate system, aligned Dimensions (parallel Dimensions) are created. For linear entities not parallel to an axis of the coordinate system, either aligned Dimensions (measuring the absolute distance between two points) or horizontal or vertical Dimensions (measuring the horizontal or vertical distance between two points) depending on where you move the pointer are created.
For curved entities, you can create radial, diameter, linear, angular, and arc length Dimensions.
To dimension entities:
Click Dimension > Auto (or type AutoDimension). In the graphics area, select an entity to dimension. Click to place the dimension line. To use another dimension type for Circles or Arcs, specify an option: Diameter. Creates a diameter Dimension. Radial. Creates a radial Dimension for an Arc or Circle. Linear. Creates a linear Dimension of the diameter of a Circle or an aligned, horizontal, or vertical Dimension between the end points of an Arc. Angular. Dimensions the angle between the end points of an Arc. Arc length. Dimensions an Arc length. Note: The chosen option is the default the next time you use the AutoDimension command.
When you move the pointer during a linear dimensioning, you can: Lock. Determines the current dimension type (aligned, horizontal, or vertical) regardless where you move the pointer. Unlock. Unlocks the type of linear dimension used. Press Enter.
*** In short, when you use this tool you click on an entity and it will know what dimension you’re looking for. For Circles, you can specify in the command window R or D for Radius or Diameter. This would be extremely useful on large drawings where a lot of dimensioning is to be done. One tool and start clicking on entities for dimensioning.
|
|
1691 | QCAD (main) | Bug Report | Very Low | Issue with Layouts after "File-Revert" | Assigned | |
|
Task Description
QCad 3.19.2 Professional, 64bit, Liux Mint
Case: 1. Open some saved drawing with viewport entities on layout block (paper space). Print Preview mode is “On” automatically. 2. After “File-Revert” drawing is reopened on layout block (paper space), but now Print Previw mode is “Off” .
For example can try on “flange.dxf”
|
|
1697 | QCAD (main) | Feature Request | Low | Dimensioning - add option for horizontal text alignment | Assigned | |
|
Task Description
Dimensioning - add option for horizontal text alignment.
Basically an option in drawing preferences to align text horizontally instead of vertically.
|
|
1698 | QCAD (main) | Feature Request | Low | Dimensioning - add option to split dimensions | Assigned | |
|
Task Description
Dimensioning - add option to split dimensions.
To have an option to split the extension lines if they run over other entities.
|
|
1699 | QCAD (main) | Feature Request | Low | Dimensioning - add option to insert text in the middle ... | Assigned | |
|
Task Description
Dimensioning - add option to insert text in the middle of dimension.
To have an option to have text aligned in the middle of the dimension line, rather than above it.
|
|
1701 | QCAD (main) | Feature Request | Low | Layer List / Block List: add filter input | Assigned | |
|
Task Description
Add text filter for layer list, block list.
|
|
1719 | QCAD (main) | Bug Report | Very Low | Undo on converted drawing leads to wrong label position... | Assigned | |
|
Task Description
Drawing converted from inch to mm - undo leads to wrong dim label position. I can fix that with “Reset Label position” but it would be nice if QCAD could to that in first place.
|
|
1722 | QCAD (main) | Feature Request | Low | Option to insert viewport at either of the rectangle co... | Assigned | |
|
Task Description
Hi Andrew,
Currently the only option to insert a viewport is using the central insertion point, for better placement it would be useful to have an option to insert viewports at any of the four corners in addition to the centre.
Hope that makes sense.
Many thanks
Clive
|
|
1731 | QCAD (main) | Feature Request | Low | Option to place text to other side | Assigned | |
|
Task Description
Hi Andrew,
It would be good to have an option to be able to place the text to the left or right,maybe just a simple check box? please see attached screenshot to explain. In this instance (and I have to do this a lot ;)) I had to explode the dimension entity and rearrange the text manually :(
Many thanks
C;live
|
|
1740 | QCAD (main) | Suggestion | Low | Make unprintable layers also hidden in print preview | Assigned | |
|
Task Description
Make unprintable layers also hidden in print preview
|
|
1754 | QCAD (main) | Suggestion | Low | When Selecting multiple blocks that contain the same at... | Assigned | |
|
Task Description
When selecting multiple blocks that contain the same attribute names, attribute properties appear with the values of the last selected block instead of “various”. I do not know if this is a “bug” or developer option, but “various” would be better in my opinion.
|
|
1772 | QCAD (main) | Feature Request | Low | Go back on right-click on shaded Tool button | Assigned | |
|
Task Description
Right-click on the tools on the left-hand side of the screen brings you back in the hierarchy.
However, that does not work if you right-click while hovering above a button that that is shaded (inactive).
|
|
1788 | QCAD (main) | Feature Request | Very Low | New snap: reference points of a block references | Assigned | |
|
Task Description
I know this was reported and fixed before ...
https://www.qcad.org/bugtracker/index.php?do=details&task_id=843
... but it looks like we have the issue now back with some kind of variation.
If I use the test drawing which I posted in 2013 ( FS#843 ) it works still as expected after it was fixed.
If I create a new block it won’t work in a new drawing nor in the old test drawing - no chance to snap to the Block Reference.
Edit: New Test drawing:
|
|
1801 | QCAD (main) | Performance Issue | Low | low perfomance in paper space and viewports | Assigned | |
|
Task Description
Improving the performance of the exceptional use of the processors when switching from the model to the paper space (testing with the attached file) the functionalities of the commands for the viewports are too low in the paper space.
|
|
1826 | QCAD (main) | Feature Request | Low | guide lines when extending lines | Assigned | |
|
Task Description
When using the SHIFT key while dragging the end point a perpendicular guide line is displayed (see attached screenshot). It would be very helpful if other guide lines with x=const. and y= const. are displayed when pressing SHIFT + ALT key together while dragging.
|
|
1827 | QCAD (main) | Feature Request | Low | Property Editor: Accept advanced scale expressions for ... | Assigned | |
|
Task Description
Hi,
Identical scale expression used in Print Preview like 5:1, 5/1, 5”=1”, 5 are working flawless like expected. Same expression used in a Viewport scale leads to different outcomes.
The Property Editor used to fix that in Paper_Space does also not accept those standard expressions.
|
|
1836 | QCAD (main) | Feature Request | Low | Offset for paste along entity | Assigned | |
|
Task Description
add a new parameter “offset” in the dialog “Paste along entity”
see https://www.qcad.org/rsforum/viewtopic.php?f=31&t=5929&p=22307#p22307
|
|
1838 | QCAD (main) | Feature Request | Low | Carbide Create import | Assigned | |
|
Task Description
Add support for importing Carbide Create files (.c2d).
Format is JSON based, human readable.
|
|
1851 | QCAD (main) | Suggestion | Low | Lateral surface of a cone | Assigned | |
|
Task Description
Module mise à plat d’un cone
Bonjour,
Serait il possible dans un futur d’ajouter un module de mise en plan de cone.
Une petite fenêtre sur lequel on donne par exemple : 1- Ø haut 2- angle de coupe du haut 3- hauteur du cône 4- Ø bas 5- angle du bas 6- épaisseur matière
Ce qui permettrai de sortir une mise en plan a plat de la forme
|
|
1870 | QCAD (main) | Feature Request | Low | Stretch tool / option to turn selection restriction on... | Assigned | |
|
Task Description
Hi,
since 3.19.2 the Stretch tool looks for any selection and follows the specification “Only stretch selected entities if there is a selection”.
That is a nice feature but it leads many times to confusing because I have to deselect a selection just because I need to use the stretch tool on something else on the fly. The same if I “forgot” a selection outside of my zoom which is still important for me. The stretch tool just won’t work without any message why not. My routine now is that I terminate every selection just before I use the stretch tool just not to be surprised by “why isn’t it working”?
It would be nice to have in the Stretch option bar a checkbox to turn the “only selection feature” on or off. QCAD should remember that setting.
|
|
1890 | QCAD (main) | Feature Request | Low | Possibility to address an QCAD extern font folder | Assigned | |
|
Task Description
Like the Library Browser it would be nice to be able to define a extern font source folder. Especially now after we are able to create our own cxf fonts with QCAD.
The reason is the same why we have it already for the library - without it we have to copy our individual fonts manually every time after a QCAD update to use them uninterrupted for existing and new drawings.
|
|
1895 | QCAD (main) | Feature Request | Low | Add support for block transformation matrices | Assigned | |
|
Task Description
Support transformations by transformation matrix for block references.
See also: https://www.qcad.org/rsforum/posting.php?mode=reply&f=33&t=6333
|
|
1900 | QCAD (main) | Bug Report | Very Low | Remote shares initially not accessible. | Assigned | |
|
Task Description
My data files are stored on network shares (synology) with a GB link. QCAD Pro is run in Admin mode.
While in my Windows browser all remote shares are accessible (Green), in the QCAD file open menu they are initially shown as not accessible (Red). By accessing a specific drawing file in a remote share, the share will open and turn green.
Same behavior using ‘Open recent’. Always the message is given that the requested file does not exist, and the file is wiped from the ‘Recent Open’ list. Only if the share is first accessed through ‘Open’ with a random file, it will turn and a ‘recent open’ file for that share will open.
Drag and Drop from a remote share will never work.
|
|
1905 | QCAD (main) | Bug Report | Very Low | View > Property Editor: Changing attribute of block cha... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6367#p23947
|
|
1915 | QCAD (main) | Suggestion | Low | Viewport does not rotate view-port when changed in pape... | Assigned | |
|
Task Description
To reproduce
1. Select a new view-port in model-space 2. Select the appropriate paper-space 3. When the paper space opens change the angle of the viewport.
Actual
The object in the viewport changes but the viewport itself remains unchanged
Expected
That both the view-port and the object changes angle as the angle is updated
Motivation
If you abort the placement (but keep the angle) and go back to model-space and then redo the operation the view-port is rotated along the angle. It seems that the viewport only picks up the initial angle once the paper-space is open and ignores any changes thereafter
Workaround
1. Select the view-port per normal in model-space 2. Open the paper-space and set the wanted angle but do not place the view-port in paper space 3. Abort the placement on paper-space and redo the whole operation
Once the paper space is opened again the view-port will have the chosen angle
|
|
1916 | QCAD (main) | Bug Report | Low | Moving an object in an angled viewport with mouse does ... | Assigned | |
|
Task Description
To reproduce
1. Select a new view-port in model-space 2. Select the appropriate paper-space 3. When the paper space opens change the angle of the viewport to 90 degrees 4. Place view-port in paper space 5. Select the view-port in paper-space by clicking it 6. Try to move the object itself in the view-port (by clicking the “top” dot) to the right by moving the mouse to the right while holding the left mouse-button.
Actual
The object in the viewport moves down vertically NOT to the right
Expected
The object moves to the right
(It seems mouse movement does not compensate for the rotated angle of the viewport)
Workaround
None, except compensate for the angle in your head and moving the mouse the “wrong” way when correcting the placement of objects in the view-port
|
|
1917 | QCAD (main) | Feature Request | Low | Automatic labels with static information of the drawing | Assigned | |
|
Task Description
I would like static information of the drawing (like scale, creation-date, modified-date, revision etc) to be available as automatic labels to be placed in the drawing (with selectable style, font etc)
This would greatly simplify the creatin of title sections in the drawing and making sure it is consistent with the actual drawing and not requiring manual “synchronization”.
|
|
1920 | QCAD (main) | Feature Request | Very Low | Edit > Application Preferences: Add preference to disab... | Assigned | |
|
Task Description
See also: https://www.qcad.org/rsforum/viewtopic.php?f=89&t=6447
|