QCAD Bugtracker

QCAD - 2D CAD System.

Click here for a documentation of the DokuWiki formatting syntax that can be used in reports

Please search for existing tasks (also closed ones) before opening a new task.

Please make sure that you are using the latest Version of QCAD before posting a bug (menu Help > Check for Updates)

IDCategoryTask TypeSeverity  descSummaryStatusProgress
1934QCAD (main)Feature RequestLowDiametric text - overlaidAssigned
0%
Task Description

Diametric text is always placed above a horizontal measurement.

I often want to indicate both the inside and outside diameter of an object e.g. a wheel using diametric text. The text is overlaid and illegible.

To avoid text overlapping, I use Horizontal Aligned because I can control the position of the text to avoid illegible text.

A better method would be to alternate the placement of diametric text (alternatively) above and below a measurement so that in the majority of cases an overlap would be avoided.

Similarly for a vertical measurement, the text is overlaid and illegible.

When the angle is almost vertical, the angle controls the side the text appears however it also reverses the direction of the text (which is logical but not attractive).

Kind regards
Simon

1954QCAD/CAMReleaseLowRevised PWM Post ProcessorAssigned
0%
Task Description

Hallo Andrew,

I have revised the PWM Post Processor to Revision D.

1971QCAD/CAMBug ReportLowCAD/CAM 3D SimulatorAssigned
0%
Task Description

Hallo Andrew,

Found a bug in the 3D Simulator execution

1972QCAD (main)Bug ReportLowHatch import fails for boundaries with many very small ...Assigned
0%
Task Description

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6648

1976QCAD (main)Feature RequestLowEnvelope at offset to a poly toolAssigned
0%
Task Description

See:
https://www.qcad.org/rsforum/viewtopic.php?t=6650

1977QCAD (main)Feature RequestLowCorresponding coordinate format Assigned
0%
Task Description

Hi,

It would be less confusing to read messages in the command line protocol if it would use the same coordinate separators like the settings below Application Preferences / General / Coordinate Format.

This example shows the “Absolute Cartesian Coordinate” but of course all corresponding format settings should be used within messages.

Absolute Cartesian Coordinate: Setting = semicolon (;) but the message will use division (/).

1982QCAD (main)Feature RequestLowmeasure DIN 1356Assigned
0%
Task Description

To measure in the format DIN 1356 , Architect
It is hard work to do this manual input with meta characters.

2014QCAD (main)Bug ReportLowFocus on Options Toolbar failsAssigned
0%
Task Description

Scenario: e.g. Tools Move/Copy and Rotate switched to “use without dialog.

Launch within a drawing Move/Copy, use the Keyboard keys CTRL + Space to focus on the Option Bar - the field for Numbers is Highlighted and I can change it. Further navigation with keys on the keyboard depends on remembered option (copy yes/no etc what make a navigation possible or not. It looks like the navigation with the Arrow keys is focused on the canvas and sooner or later the courser will jump to the Command Line or Property editor. Same behavior with the Rotation tool.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=6828

2016QCAD (main)Bug ReportLowOffsetting multi selection of polylines halts prematureAssigned
0%
Task Description

See:
https://qcad.org/rsforum/viewtopic.php?&t=6827&p=25992#p25992

Offsetting 32 polys from ellipses fails.
Offsetting 16 polys can be completed with 2 selections for outer and 2 for inner.

For some reason the offset function halts premature.

Regards,
CVH

2034QCAD (main)Feature RequestLowPaint Properties to include modifying linetype scales w...Assigned
0%
Task Description

Previous Feature Request #1285, dated 2015, incorporated in QCADPro 3.24. I regularly adjust linetype scales on hidden, centreline and phantom lines to achieve the best appearance on the drawing when printed. I note the Paint Properties feature copies all the attributes of the chosen line but does not copy the scale. I have to change the scale of each line, even after ‘painting’. This copying all Properties is something AutoCAD does. I know I could change the line to Hidden2 etc. and tick the ‘scale lines’ box in Drawing Properties but that is not always successful- copying properties is a quick and useful way of achieving the required result.
QCAD Pro 3.24 Windows10.

2037QCAD (main)Feature RequestLowSupport alternative angle referenceAssigned
0%
Task Description

E.g. 0 degrees at the top, clock-wise for positive direction, alternative angle units.

2041QCAD (main)Bug ReportLowcircletangent2 doesn't solve correctly if the defining ...Assigned
0%
Task Description

In my example I can’t draw a circle with circletangent2 if the defining point is on one of the defining tangents. The tangency is lost when I try to do this.

I attached 4 screenshots: TheExample.png, TryingPoint1.png, TryingPoint2.png and The_Point_Isn’t_On_The_Tangents.png.

2056QCAD (main)Feature RequestLowOption Duplicate layer (yy) inclusive all sub-layers.Assigned
0%
Task Description

If I’ve to duplicate a layer with a bunch of sub-layer it’s a kind of a Sisyphus task to get it done.
Currently I have to duplicate each single layer. Then in an additional step I’ve to address each child layer to the proper parent layer.

Current lack:
Marked parent layer with all sub-layer / Duplicate Layer / only ONE layer will be duplicated.

With other words: If I have to duplicate a layer with 5 sub-layer it requires 11 steps to get a copy of that tree ... :-(

2057QCAD (main)Feature RequestLowMultiline toolAssigned
0%
Task Description

Implement a multiline tool.

2072QCAD (main)SuggestionLowInserted and flipped block mirrors text and dimAssigned
0%
Task Description

Text and/or DIM used in blocks will be mirrored if inserted with a vertical/horizontal flip option.

Text/DIM which was successfully used in previos QCAD versions are now mirrored if they are loaded in the current version.

Version 3.23.0 doesn’t shows this behavior.

https://www.qcad.org/rsforum/viewtopic.php?f=32&t=7206

2092QCAD (main)Bug ReportLowcrash when changing shortcut in preferencesAssigned
0%
Task Description

The application crashes when I try to change a shortcut in the preferences. And only after resizing the preferences window.
In the attachement are the cli warnings.
I also tried the 3.24.3.9 snapshot with the same result.

2099QCAD (main)Bug ReportLowDIM Label, Square Symbol doesn't adopt layer attributesAssigned
0%
Task Description

The square symbol offered as symbol in DIM label is the only symbol which doesn’t adopt the layer color.
If I print a drawing in full color it leads to a black symbol in an otherwise colored dimension.

It is also the only symbol which has a solid filling what is confusing when you work with it in Model_Space ...

2115QCAD (main)SuggestionLowMove toolbars with negative positions to 0 positions Assigned
100%
Task Description

As it can be seen in the attached image, QCAD toolbars may dock to a position slightly outside the visible area of the screen. After having docked there, I have not been able to move them any more. Their current position is just in the middle of the screen.

The position of the toolbars remains the same after the deinstallation of QCAD, shutting down, restarting the computer and reinstalling QCAD. I kindly ask for help.

Kind regards
Reinhard

2125QCAD (main)Bug ReportLowText disappears when you zoomWaiting on User
0%
Task Description

When I zoom, the text disappears in certain zoom levels after updating to the latest version.

2130QCAD (main)TaskLowText: Text dialog removes tabsAssigned
0%
Task Description

Text dialog (QTextEdit) strips tabs in toHtml.
If tabs can be retained, text entities could support tabs.

275QCAD (main)Feature RequestLowRounding all corners of a polylineAssigned
0%
1 Task Description

Modify - Round - Click polyline - round all corners

316QCAD (main)Feature RequestLowBlocks list and selected blockAssigned
0%
1 Task Description

Wouldn’t it be nice, if selecting a block in model view would somehow highlight (just like clicking a block in the list does) the selected block in the “Block List” window?

(Feature request sounds a little harsh, enhancement proposal would seem more apt.)

500QCAD (main)Feature RequestLowAutohide Side PanelAssigned
0%
1 Task Description

it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.

502QCAD (main)Feature RequestLowPoints on line: enter distance instead of number of poi...Assigned
0%
1 Task Description

Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.

512QCAD (main)Feature RequestLowModify stretch and Restrict orthoAssigned
0%
1 Task Description

The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.

So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?

598QCAD (main)Feature RequestLowSupport tangents between ellipsesAssigned
0%
1 Task Description

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

609QCAD (main)Feature RequestLowClean up toolAssigned
0%
1 Task Description

To have a ‘clean up ' tool to:

- eradicate duplicate lines
- eradicate stray points
- remove empty layers
- remove unused blocks

Perhaps with an initial dialog which allows the user to choose what they want to clean up.

612QCAD (main)Feature RequestLowPlot math functionsAssigned
0%
1 Task Description

Input:

  1. X axis min/max or choose line (?) or center (for polar functions)
  2. function: y = f(x) / polar function: r = f(a)

Output:

  1. function plot
617QCAD (main)Feature RequestLowDifferent dimensions font sizes in the same drawing.Assigned
0%
1 Task Description

Different dimensions font sizes in the same drawing.

625QCAD (main)Feature RequestLowDistribute block along spline, polyline, ...Assigned
0%
1 Task Description

See:
http://www.youtube.com/watch?v=27bCgg3zLVA

638QCAD (main)Feature RequestLowFeature request- text find/replace functionAssigned
0%
1 Task Description

Feature request- text string find/replace

Scope: entire drawing/selected objects set/chosenlayer only

Functionality:

‘find’ with ‘zoom to’, first, next, previous, last

‘replace’ with ‘next’, ‘undo’, ‘all’

This functionality is very useful when using QCad for system diagrams and the like.

661QCAD (main)Feature RequestLowAdd support for the DGN formatAssigned
0%
1 Task Description

See OpenDesign news:
“ODA consolidates support for .dgn and .dwg file formats in Teigha”

675QCAD (main)Feature RequestLowOption for fixed Text and Dimension heights ...Assigned
0%
1 Task Description

I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is.
Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing.
Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights.
Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers. ;-)

680QCAD (main)Feature RequestLowAdditional Export function for Sketchup etc. ....Assigned
0%
1 Task Description

Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176

681QCAD (main)Feature RequestLow'Plug-in' for Gear generatorAssigned
0%
1 Task Description

Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc...
To produce 2D templates for all sorts of projects.

687QCAD (main)Feature RequestLowPlot Stamp optionAssigned
0%
1 Task Description

To add a Plot Stamp option for printing, to have options to print file name, date , time etc...

See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967

720QCAD (main)Feature RequestLowLocked Blocks ....Assigned
0%
1 Task Description

It is nice that I can scale or rotate a block - but right now I see also a big plus in a kind of locking function for Blocks.
It would be nice to have a “locked” option ad least for the scaling of blocks.

Example: Think about Clives “Radiator ‘Cover’ screen” http://www.qcad.org/rsforum/viewtopic.php?f=51&t=2060 and how you could manipulate this screen with “scale blocked blocks” ;-)

728QCAD (main)Performance IssueLowSlow loading of drawing with many block insertsAssigned
0%
1 Task Description

Slow loading of drawing with huge number of block inserts (more than 10000).

756QCAD (main)Bug ReportLowDisplay problem in the Text "Character Map" ...Assigned
0%
1 Task Description

XP/32

Go to:
Text → Special Characters → Others → “Character Map” pops up.
Adjust Zoom to 100% = display problem (not enough space for the single character.

775QCAD (main)Feature RequestLowNote book tool for QCADAssigned
0%
1 Task Description

It would be really cool to have a Note book tool for QCAD!

For example I am often working on a draft and at the same time scribbling notes down on a separate piece of paper relating to the drawing I am working on, could be anything e.g. add a block,add a dimension etc. etc... all sorts of things to remind myself about - all related to a particular drawing.

Of course I could use any number of other programs for this but a simple dedicated tool inside QCAD (could be called the ‘QCAD scribbler ;)) would be much better, especially one that can save the notes to a particular file, then when I open up my drawing again - my notes are there too!

776QCAD (main)Feature RequestLowExtra ' isometric' buttons for using Line from Angle.Assigned
0%
1 Task Description

When working with the isometric grid (in any projection - Top, Right, Left) and drawing from ‘scratch’ as it were, without using the projection tools - I find myself using ‘Line from Angle’ the most.

It would be extreamly useful to be presented with two extra buttons when using this tool, a 30 degree button and a -30 degree button, this way I wouldn’t need to keep typing in the angle difference here.

Regards

Clive

786QCAD (main)Feature RequestLowMulti - Breakout toolAssigned
0%
1 Task Description

A ' Multi ' Breakout tool or added option to the existing Breakout tool.

For example see attached image.

An option to remove all segments within a chosen boundary would be good, in my example I want to remove all the hatching within the Red circle.

So after exploding the Hatch, currently I have to remove all segments singularly!

Of course I could have placed the circle first and hatched around it - but in this and most instances it is easier to design and to produce the Hatching first and then place my circle/shapes etc.

788QCAD (main)Feature RequestLowExtra option to detect duplicates only in user defined ...Assigned
0%
1 Task Description

It would be very useful to have an extra option to only detect duplicates within a user defined area.

789QCAD (main)Feature RequestLowScale tool - mouse-pointer - inversely proportional sca...Assigned
0%
1 Task Description

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

798QCAD (main)Feature RequestLowelaborate on purge toolAssigned
0%
1 Task Description

Modify the “purge layer” tool to preserve empty layers with a locked status.
see: http://www.qcad.org/rsforum/viewtopic.php?f=31&t=2386

817QCAD (main)Feature RequestLowSnap and cut all intersection in a given area tool ...Assigned
0%
1 Task Description

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

823QCAD (main)Feature RequestLowAdd Midpoint Handles to Lines and PolylinesAssigned
0%
1 Task Description

The Midpoint Handles should be used to move Polyline Segments and lines. This would add easy to access stretch functionality.
Combined with a shortcut(hold down shift or alt etc.) to fix the movement to be orthogonal to the line this would bring a lot of extra value.
It would also be possible to to have another shortcut to easily insert nodes to Polylines (again hold shift or alt etc.)

839QCAD (main)Feature RequestLowGrid / Meta Grid info + Drawing Unit Info ...Assigned
0%
1 Task Description

At our QCAD Drawing window, below right corner, we have the Info displayed what are the Grid / Meta Grid settings.
It would be nice to have additional the Info for the drawing unit ...

849QCAD (main)Feature RequestLowMake maximum visible reference points of selection conf...Assigned
0%
1 Task Description

Provide configuration option to raise / lower maximum reference points that are shown for selected entities (currently fixed to 1000).

Original report:

Imported a spline-dxf from adobe illustrator. Converted the spline to polyline with explode command. Then no anchor points / vertex points / vertices were showing anymore. Simplified the polyline so that it had less than 1000 points. Vertices became visible.

I think some freeform objects need actually more than 1000 vertices. Also them need to be edited. Please increase the amount of vertices showing to biginteger

regards

Benjamin

853QCAD (main)Feature RequestLowKeep selection after undo ...Assigned
0%
1 Task Description

If I move something and it went wrong I can easily undo the last move and start over without the need of a re-selection.
If I copy something and it went wrong I can undo the last copy but I have to re-select everything again.

It would be nice to keep the once chosen selection in both “undo” situation!

Same with similar functions like rotate etc. ....

Showing tasks 201 - 250 of 399 Page 5 of 8<<First - 3 - 4 - 5 - 6 - 7 - Last >>

Available keyboard shortcuts

Tasklist

Task Details

Task Editing