|
500 | QCAD (main) | Feature Request | Low | Autohide Side Panel | Assigned | |
1 |
Task Description
it would be ideal to be able to have the option to autohide the side panel to increase the visible drawing space when working on a small screen.
|
|
502 | QCAD (main) | Feature Request | Low | Points on line: enter distance instead of number of poi... | Assigned | |
2 |
Task Description
Points on line: enter distance instead of number of points as a variant of the tool or as a new tool.
|
|
503 | QCAD (main) | Feature Request | Low | Convert entities to points with a fixed distance | Assigned | |
|
Task Description
Select lines, arcs, ... and convert them to points along the lines, arcs, ... with a fixed distance.
See also forum at: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1834
|
|
512 | QCAD (main) | Feature Request | Low | Modify stretch and Restrict ortho | Assigned | |
1 |
Task Description
The modify stretch tool wants first and second corner, start and end point, then starts afresh. When I turn on restrict horizontally eg to align two points between start and end, the restriction sticks and I have to call restrict none, to be able to perform the next iteration, set the first corner then.
So, in the quest for a comfortable user interface, it was nice, if the modify stretch first/second corners parameter setting was not affected by current restrict/ortho etc. settings. Actually, that does not make any sense at all anyways, does it, a rectangle is defined by two degrees of freedom, isnt it?
|
|
514 | QCAD (main) | Feature Request | Low | Punktpestimmung Intersection manual muss immer wieder n... | Assigned | |
|
Task Description
Beispiel: Zeichnen einer Linie (Line two points) mit Punktbestimmung. Wähle ich für die Punktbestimmung z.B. “End” bleibe ich in diesem Modus bis ich etwas anderes wähle. Gut
Wähle ich für die Punktbestimmung “Intersection manual” muss ich dies für jeden Punkt immer wieder neu anwählen. Schlecht
|
|
516 | QCAD (main) | Feature Request | Low | To add option to 'print only' selected area. | Assigned | |
2 |
Task Description
To add the option to ‘print only’ selected area in a drawing.
|
|
519 | QCAD (main) | Feature Request | Low | Press tab to access first control in options tool bar | Assigned | |
1 |
Task Description
See: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1867
Apparently this was possible in QCAD 2 due to the default behavior of Qt.
|
|
523 | QCAD (main) | Bug Report | Low | Selection tool button in CAD tool bar shows line tools ... | Assigned | |
|
Task Description
The selection tool is not accessible:
Click on Selection Tool icon - left panel:
Left panel then shows line tool options.
Click “back” button at top of left panel:
Left panel then shows selection options.
Click an option icon:
Left panel then shows line tool options again.
|
|
525 | QCAD (main) | Feature Request | Low | change the printed symbol of points | Assigned | |
1 |
Task Description
Hi,
in QCAD3 RC2 points were printed as crosses, in QCAD3 RC4 they are printed as (very little) points. I think this isn’t a bug but a feature.
It would be nice if one could change this behaviour / select the symbol of points.
Best regards - Stefan
This is a double post of http://www.ribbonsoft.com/rsforum/viewtopic.php?p=5870#5870 as suggested there.
|
|
554 | QCAD (main) | Feature Request | Low | Auswahlbox sollte auch mit der Shift Taste Bereiche dem... | Assigned | |
|
Task Description
Ziehe ich mit der Maus eine normale Auswahlbox kann ich Elemente markieren. Möchte ich einzelne Bereiche wieder herausnehmen muss ich alle Elemente einzeln anklicken (mit gedrückter Shift Taste). Ich kann zwar dies komfortabler gestalten mit der Select → (De -) Select Contour Funktion welche aber erst über das Menue aufgerufen werden muss.
So wie ich einzelne Elemente mit der Maus auswählen und mit der Shift-Maus Funktion deselektieren kann wäre es schön wenn die Shift Taste auch bei Auswahlbereichen direkt zum deselektieren eingesetzt werden könnte.
|
|
564 | QCAD (main) | Feature Request | Low | Settings organisation in level | Assigned | |
|
Task Description
As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them. These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules : - no sub-level if there is only one subject - no items on main level if there are already 1 or more sub-level(s). For instance : - sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ; - the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ; Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?
|
|
566 | QCAD (main) | Feature Request | Low | Shortkey for rectangle text rotation | Assigned | |
1 |
Task Description
I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.
|
|
579 | QCAD (main) | Feature Request | Low | Copy layers / blocks | Assigned | |
2 |
Task Description
Duplicate (copy, clone) a layer with or without entities on it. New name can be specified by user.
|
|
584 | QCAD (main) | Bug Report | Low | Library Items können unbrauchbar gemacht werden durch l... | Assigned | |
1 |
Task Description
Nach einigen Überraschungen ....
Es ist möglich Layer in nicht eingefügten oder unsichtbar geschalteten Library Items unbemerkt zu löschen ....
Fallbeispiel 1: Ich arbeite an einer Zeichnung die u.a. den Layer “Gelbe Linie” benutzt. Ich füge ein Library Item ein was auch einen Layer “Gelbe Linie” hat. Ich lösche - aus welchen Gründen auch immer - in der Zeichnung das Library Item weil ich es erst später wieder verwenden will. In der Blocklist ist es natürlich immer noch verfügbar. In der Zeichnung lösche ich den Layer “Gelbe Linie” da ich diesen nicht brauche brauche - habe aber natürlich nicht im Kopf welche Layer in meinen Blocks verwendet wurden. Nach einiger Zeit will ich den Block (den aus der Library) wieder einfügen - dieser ist nun aber unbrauchbar da der Inhalt welcher auf dem Layer “gelbe Linie” war fehlt. Das Library Item neu aus Library laden um das bereits existierende zu reparieren scheitert da das erste nicht überschrieben werden kann. Ich muss den ersten Block löschen um den neuen benutzen zu können.
Fallbeispiel 2: Da das selbe (löschen der Layer) auch passieren kann bei unsichtbar geschalteten Blöcken kann es dazu führen das ich zig bereits positionierte Blöcke zerstöre und neu platzieren muss um meine Zeichnung zu reparieren.
Fallbeispiel 3: Ich sehe in meiner Zeichnung einen Layer “Gelbe Linie”. Weiß nicht was das ist - schalte alle Layer unsichtbar außer “Gelbe Linie”. Klicke auf “Auto Zoom” um zu sehen was den auf “Gelbe Linie” ist. Finde nichts = also leer! Lösche Layer “Gelbe Linie”. Der Layer wurde aber von einem im Moment nicht verwendeten Library Block verwendet. Es gibt keinen Hinweis das ich damit ein Library Item zerstören könnte ....
Lange Rede kurzer Sinn: Wäre es machbar/sinnvoll Layer in Blöcken nur löschen zu können wenn ich mich im Edit Modus der Blöcke befinde?
|
|
586 | QCAD (main) | Feature Request | Low | File open dialog with preview | Assigned | |
1 |
Task Description
Since this is not supported by Qt anymore, this would likely have to be implemented from scratch.
|
|
588 | QCAD (main) | Feature Request | Low | Bemaßung Prefix Dropdown mit eigenen Vorgaben erweitern... | Assigned | |
|
Task Description
Es wäre Arbeitserleichternd wenn ich bei den Optionen für Bemaßungen (Prefix/Postfix) eigene Präferenzen speichern könnte so das diese in allen Zeichnungen von mir verfügbar wären. Zudem wäre es wünschenswert dieses nicht nur bei den Prefix sondern auch bei den Postfix Angaben nutzen zu können was dann alle(?) Manipulationen erschlagen würde.
Siehe auch: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=11&t=1966
|
|
596 | QCAD (main) | Feature Request | Low | Tool "Lengthen" mit "Total" erweitern oder .... | Assigned | |
1 |
Task Description
Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.
Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.
Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.
Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel
|
|
598 | QCAD (main) | Feature Request | Low | Support tangents between ellipses | Assigned | |
2 |
Task Description
To add support for drawing tangents between ellipses.
See topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003
|
|
601 | QCAD (main) | Feature Request | Low | Für Berechnungen neu zu erstellende Elemente Werte von ... | Assigned | |
|
Task Description
Es wäre schön wenn ich Werte wie zum Beispiel Längen von Linien direkt abgreifen könnte um diese weiter in Berechnungen verwenden zu können.
Beispiel: Ich habe eine Linie konstruiert wobei sich eine Länge y ergeben hat.
Nun möchte ich eine Linie zeichnen die 5 mal y sein soll.
Linientool → Wert 5* eingeben und y durch Auswahl mit der Maus von dem vorhandenen Elements übernehmen.
Natürlich könnte ich die Geometrie Info benutzen um den Wert abzulesen oder auch über die Zwischenablage zu benutzen. Ein abgreifen mit der Maus wäre aber schneller, direkter und wahrscheinlich auch mit weniger Fehlern (Human error) verbunden. Wahrscheinlich auch genauer da QCad, denke ich, mit mehr Nachkommastellen rechnet, oder?
|
|
604 | QCAD (main) | Feature Request | Low | Measure and record X,Y coordinates tool - add to info ... | Assigned | |
|
Task Description
Feature request See topic - http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2015
Just a thought, but one that could be useful for machinists in particular - a measurement tool that can snap to a point as per usual, but then just displays the drawing coordinates in X and Y. This could be expanded to the dimensions tool set, so that you can click on a point and print the coordinates next to it.
|
|
609 | QCAD (main) | Feature Request | Low | Clean up tool | Assigned | |
1 |
Task Description
To have a ‘clean up ' tool to:
- eradicate duplicate lines - eradicate stray points - remove empty layers - remove unused blocks
Perhaps with an initial dialog which allows the user to choose what they want to clean up.
|
|
612 | QCAD (main) | Feature Request | Low | Plot math functions | Assigned | |
1 |
Task Description
Input:
X axis min/max or choose line (?) or center (for polar functions)
function: y = f(x) / polar function: r = f(a)
Output:
function plot
|
|
614 | QCAD (main) | Feature Request | Low | Blocks - overwrite current layer yes/no ... | Assigned | |
|
Task Description
I would appreciate an option for the library Browser that gives me the possibility to decide by my self to use the current (same name) layer in my drawing or overwrite it with the existing layers in the library item.
Imagine the possibility’s of this feature ....
|
|
617 | QCAD (main) | Feature Request | Low | Different dimensions font sizes in the same drawing. | Assigned | |
|
Task Description
Different dimensions font sizes in the same drawing.
|
|
618 | QCAD (main) | Feature Request | Low | user defined lineweight | Assigned | |
2 |
Task Description
To have the option to set your own ‘user defined’ line weight.
|
|
620 | QCAD (main) | Feature Request | Low | option to have horizontal dimension info using vertical... | Assigned | |
2 |
Task Description
Some times I need to have the dimension info using the Vertical Dimension tool displayed horizontally. See attached image: Possibly this option could be added to the Label drop down menu.
|
|
622 | QCAD (main) | Feature Request | Low | Disproportianal scaling of arcs, ellipses | Assigned | |
|
Task Description
Support disproportional scaling also for arcs, ellipses, other entities, not only lines and polylines with only line segments.
|
|
625 | QCAD (main) | Feature Request | Low | Distribute block along spline, polyline, ... | Assigned | |
1 |
Task Description
See: http://www.youtube.com/watch?v=27bCgg3zLVA
|
|
628 | QCAD (main) | Feature Request | Low | Improve workflow for entering tool parameters | Assigned | |
|
Task Description
Provide keyboard shortcuts for options tool bar.
Under Linux, Windows Alt+Key shortcuts can be used. Mac OS X does not seem to support this.
See also suggestions at: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2053&view=unread#unread
|
|
631 | QCAD (main) | Feature Request | Low | Option "Scale" für das öffnen von Templates ... | Assigned | |
|
Task Description
Wenn ich eine Zeichnung plane überlege ich mir natürlich im Vorfeld welche Blattgröße und welchen Maßstab ich verwenden möchte.
Wenn ich Templates (z.B. Zeichnungsblatt A4) für die Blattgröße öffnen könnte und dabei direkt einen Skalierungsfaktor (z.B. 10) vorgeben könnte hätte ich ohne Umwege gleich alles was man braucht. In diesem Fall ein A4 Blatt im Maßstab 1:10.
Im Grunde genommen das selbe was ich bereits mit Library Items machen kann ...
|
|
637 | QCAD (main) | Feature Request | Low | Viewports / View List | Assigned | |
|
Task Description
1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?
2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071
|
|
638 | QCAD (main) | Feature Request | Low | Feature request- text find/replace function | Assigned | |
2 |
Task Description
Feature request- text string find/replace
Scope: entire drawing/selected objects set/chosenlayer only
Functionality:
‘find’ with ‘zoom to’, first, next, previous, last
‘replace’ with ‘next’, ‘undo’, ‘all’
This functionality is very useful when using QCad for system diagrams and the like.
|
|
639 | QCAD (main) | Feature Request | Low | Ability to load a file of keyboard shortcuts | Assigned | |
|
Task Description
It would be useful if a file of keyboard shortcuts to commands could be loaded.
Then a set of shortcuts identical/based on the Autocad keyboard shortcuts can be loaded, making it much easier for Autocad users to migrate to your product.
There does seem to be some future functionality planned here, with the shortcut ‘scheme’ selector in Program Preferences, but for the moment ‘Qcad’ is the only option available.
This strategy is used to great effect by Draftsight (but who trusts a big company like Dassault/Solidworks...)
|
|
641 | QCAD (main) | Bug Report | Low | No warning is displayed when lengthen tool is used with... | Assigned | |
|
Task Description
Command ‘Lengthen LE’ will extend most arcs but not all (2 arcs in the attached drawing do not work)! There is no obvious reason for this from the users point of view.
|
|
645 | QCAD (main) | Bug Report | Low | Inch - Layerdata / Linewight still in mm ... | Assigned | |
|
Task Description
Drawing Unit is in “Inch” but the Layer Data (Line wight) is in “mm” ....
I like it ... but maybe I’m the only one
|
|
648 | QCAD (main) | Feature Request | Low | Configurable behavior for line patterns at weight 0.00 | Assigned | |
|
Task Description
A line with linestyle = dots and line weight = 0.00 appears in model space overly spaced, all other lineweights behave as expected. Suspect other linestyles to behave in a similar fashion.
See attached drawing.
Suggested fix: use the same scaling for lineweight 0.00 as for lineweight 0.05.
|
|
661 | QCAD (main) | Feature Request | Low | Add support for the DGN format | Assigned | |
|
Task Description
See OpenDesign news: “ODA consolidates support for .dgn and .dwg file formats in Teigha”
|
|
665 | QCAD (main) | Bug Report | Low | Possible printing error on Linux fedora 16? | Assigned | |
|
Task Description
On behalf of et76 Possible printing error using Linux 16 - needs further testing! Please see topic: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
Au nom de et76 Erreur d’impression possible en utilisant Linux 16 - a besoin d’autres tests! S’il vous plaît voir le sujet: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=12&t=2119
|
|
670 | QCAD (main) | Feature Request | Low | Configurable rendering options for stacked text | Assigned | |
1 |
Task Description
Customer wishes that stacked text used as subscript is rendered differently (i.e. increased text size, lower position for subscript). This may also apply to superscripts.
|
|
674 | QCAD (main) | Feature Request | Low | To add optional 'auto' dimension tracking feature. | Assigned | |
|
Task Description
It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.
See related topic: http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893
|
|
675 | QCAD (main) | Feature Request | Low | Option for fixed Text and Dimension heights ... | Assigned | |
|
Task Description
I think it would be nice to have the possibility to decide a fixed Text and Dimension (inclusive Arrows) height what is not affected by the Print scale. That means: If I have a given height of 3,5mm it will always be printed with 3,5mm - no matter what the scale for the printing is. Yes, I see also the problem that I could run in space problems after I twitch to the Print preview - but that will also happen when I change the Text hight in the preferences for a 5:1 printing. Maybe this Feature Request doesn’t looks important if you are usually working with Metric Units but if you have to handle Imperial Units then it is a pain in the back to make always the calculation to get the same heights. Try it by your self; 3,5mm = 0.137795” = 1”:1” Now I like to print it in 1”:256” ops - to small - ok 1”:64” ... no, to big, maybe 1”:128” .......and QCad can’t remember the previously numbers.
|
|
680 | QCAD (main) | Feature Request | Low | Additional Export function for Sketchup etc. .... | Assigned | |
|
Task Description
Additional Export function for export/import into 3D Programs like Sketchup etc. (file types like .dae, .3ds, .ddf, .skp).
See also: http://www.ribbonsoft.com/rsforum/viewtopic.php?f=32&t=2176
|
|
681 | QCAD (main) | Feature Request | Low | 'Plug-in' for Gear generator | Assigned | |
2 |
Task Description
Feature request for a ‘plug-in’ for generating different types of gears, like - Ring, Spur, Sprocket, Rack, etc... etc... To produce 2D templates for all sorts of projects.
|
|
684 | QCAD (main) | Feature Request | Low | Configurable behavior for using box selection with Shif... | Assigned | |
1 |
Task Description
See also: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2180
|
|
687 | QCAD (main) | Feature Request | Low | Plot Stamp option | Assigned | |
2 |
Task Description
To add a Plot Stamp option for printing, to have options to print file name, date , time etc...
See topic:http://www.qcad.org/rsforum/viewtopic.php?f=32&p=6967&sid=ba06663c8bdaef236272d80ad45ccf5f#p6967
|
|
693 | QCAD (main) | Feature Request | Medium | Support for external references (XREF) | Likely to be implemented | |
28 |
Task Description
Support for external references (XREF)
|
|
694 | QCAD (main) | Feature Request | Low | User coordinate systems (UCS) | Assigned | |
13 |
Task Description
UCS support.
|
|
695 | QCAD (main) | Feature Request | Low | Add more dimension arrow styles (e.g. dots) | Assigned | |
2 |
Task Description
Add more dimension arrow styles (e.g. dots).
See forum thread: http://qcad.org/rsforum/viewtopic.php?f=31&t=2185
|
|
700 | QCAD (main) | Bug Report | Low | Saved 'hatched' block loses hatching when using isometr... | Assigned | |
|
Task Description
Hatched block loses hatching when using isometric projection tool: See -http://www.qcad.org/rsforum/viewtopic.php?f=32&p=7063#p7063
When manipulating a saved hatched block with the isometric tool it loses the hatching unless the block is exploded.
Is this normal behaviour here? or a bug?
|
|
703 | QCAD (main) | Feature Request | Low | Info function -> contour for Hatch not closed ... | Assigned | |
1 |
Task Description
Task: If I like to make a hatch and the contour isn’t closed I get a Grey circle Info where the contour isn’t closed. Nice!
But ..... I have this Info only for ONE not proper connection and only for the moment when the mouse pointer is over the Hatch Tool Symbol.
If I have to zoom into the Problem - I will lose the Info where the problem is
To get the “Problem Info” back I have to select it again - but for that I have to zoom out ...............
It would be nice to have this “Problem Info” longer in the drawing - maybe until I solved all problems.
And it would be nice to have ALL Infos for not connected lines at the same time. It is not really helpful to repeat this function 20times if I have 20 connection problems ... ;)
|