QCAD Bugtracker

It would be nice to be able to adjust the zoom factor so that the scale on the screen matches a ruler which I lay on the screen.

Thanks!

Add parameters to the function DL_Dxf::writeVPort.
This way users will be able to specify the desired viewport.

Is the github the official repository? Are pull requests sent there accepted?

QGroupBox widgets with <property name=”checkable”> are not saved in Qcad3.conf

1. The Scrollbars for each window in the Viewports has the same size like the normal used scrollbars for windows. If you are working on a normal size Monitor it “steals” a lot of “working space”. Is there any possibility to make the scrollbars smaller or just a line to separate the windows so that I have to navigate with Keyboard and mouse?

2. I thing the Viewports and the View List belongs together - is it possible to get a button in the “View List / Tool Bar” to choose a Viewport style instead of “walking” the long way over the “Drawing preferences” Menu?

See also:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=47&t=2071

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=32&t=4729

See also:
https://qcad.org/rsforum/viewtopic.php?f=32&t=4840

Save layer state (visibility) with each added view object (optional?).

It would be a nice feature to be able to define your own toolbar.

See: http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2393

To have the option to set your own ‘user defined’ line weight.

UCS support.

Hi,
this is a usability feature request:

If you want to move an object relatively to any point (e.g. by entering @x;y in commandline) it does’nt make sense to enter a starting reference point. Of course this is possible by clicking to any location on the screen. But it’s difficult to change between mouse and keyboard so often.

It should be possible to enter a “don’t care” or “any” reference point by pressing a keyboard shortcut (e.g. enter like in AutoCAD).

Thx

If there is no selection the Properties Editor could be used to predefine the properties of to be drawn elements.

E.g. use Millimeters for construction while dimensions are displayed in Meters.

Feature request - to have an option to underline text.

My system: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz and 8 GB of RAM and NVIDIA GT218 (GeForce 210)

For a normal drawing displaying it in all detail is a good thing and the performance of my quad-core system is more than adequate.

But I discovered (or rather experienced) that when putting a large collection of individual drawings of gears onto one big sheet (960 mm x 600 mm - preparation for laser cutting), the performance was so bad that I had to wait several seconds (>10 sec) for each step in the process of arranging all the parts on the layer.

Request: It would be a big help and performance booster if you could disable the detailed view of each part/layer and only draw a rectangle to visualize the outline of the part.

Please take this in consideration. Attached you find an example of how that could look like. (Actually when pasting a drawing from the clipboard you already do that.)

Would it be possible to add a feature which turns selected text into solid fill hatched polylines?

That would make it possible to migrate the drawing from one computer system to another without having to worry whether the used font is installed on both systems, like when sending a drawing to a manufacturer for laser engraving.

Right now I can do it by hand, letter by letter, and that is a rather labour-intensive task.

Hi Andrew

A request for adding some fields to the toolpath

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=83&t=4923

Eine oft Hilfreiche Zeit/Klick sparende Erweiterung wäre eine “Total” Option bei dem “Lengthen” Tool.

Aktuell ist es mit dieser Funktion möglich ein Element zu verlängern oder zu verkürzen um den Amount X. Der Referenzpunkt (von welchem Ende) kann bestimmt werden.

Die Erweiterung die ich mir wünschen würde wäre auch ein “Total” um ein Element auf eine bestimmte Länge zu bringen ohne einen Taschenrechner benutzen zu müssen. Referenz (welches Ende oder Mitte) sollte (muss) dafür wählbar sein.

Die Funktion “Property editor” stellt bereits über die Geometry Eigenschaften die Möglichkeit zur Verfügung einen “Total” Wert zu manipulieren. Leider bin ich aber hierbei nicht in der Lage zu bestimmen welcher Element Referenzpunkt dafür benutzt werden soll. Könnte ich die Referenz wählen (welches Ende oder Mitte) wäre auch dies dann durchaus akzeptabel

To re-introduce Tile and Cascade window options like as before in QCAD 2.2.2.

It might be useful for some to have the option to turn on/off ' auto’ dimension tracking option.

See related topic:
http://www.qcad.org/rsforum/viewtopic.php?f=2&p=6893#p6893

To add the option to ‘print only’ selected area in a drawing.

Add support for automatic text line wrapping for multiline text entities.

The Omega button to insert special characters is only available in rich text mode.
Make it available in simple text mode as well.

I think it’s a useful adition and makes it easy to select objects that are overlapped. I know there is a selection filter, but sometimes this is faster and/or all the objects share the same type and such things.

If I remember correctly, Inkscape has this behaviour.

Thanks.

Find way to support custom line weights for SVG export. See also forum thread: http://www.ribbonsoft.com/rsforum/viewtopic.php?t=1594

To add support for drawing tangents between ellipses.

See topic:
http://www.ribbonsoft.com/rsforum/viewtopic.php?f=31&t=2003

Many constructions refer to a basis of elements, which stay constant in all follow-ups. As an example there is a floorplan and I would like to create different variations of room layout (e.g. A and B). In my example the basis consists of 30 layers an each variation needs 10 further ones. At last there are 50 different layers in my drawing. Designing layout A needs layer 1 to 30 (basis) and 31 to 40 (A) to be shown, but 41 to 50 (B) must be invisible. Now I modify Var.B which makes me to single click the visibility of 31 to 40 (A) to be not shown and 41 to 50 (B) to be shown. You’ve got it?

It would be great help, to save the set of all shown layers by an individual name in a pulldown-menu. Visibility of my variations could be chosen by userdefined “set of layers”, e.g. “Var-A”, “Var-B” and “Var-A_but_different”. In this way I pick just one set-name in my pulldown-list instead of marking and demarking between countless layers.

In my opinion this tool would be a small aspect in QCad but a giant leap for user-pleasentness

Support for external references (XREF)

Add support for
- tolerance display (dimtol)
- upper limit (dimtp)
- lower limit (dimtm)
- tolerance precision (dimtdec)
- tolerance text size factor (dimtfac)
- tolerance suppress zeros, etc.

See also:
https://www.qcad.org/rsforum/viewtopic.php?f=33&t=6269

I think it would be useful to add a note to the Application preferences dialog window, to explain to the user the difference between ‘Application and Drawing’ preferences and how it effects drawings in QCAD.

Please see topic for more details and feedback:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=2831&p=9724#p9724

Please seet topic:

http://www.qcad.org/rsforum/viewtopic.php?f=31&t=3124

Attached DWG/DXF files are incorrectly read by QCAD.
They contain splines drawn using ZWCAD and saved as DWG/DXF version 2000.
Above splines are polylines created with autolisp routine which converts spline to polyline, so you can see how splines should actually be drawn.

First spline is created with fit points: 2,2 4,4 6,2
Then copied and applied weight of 2 on central control point.
Then copied again and applied weight of 0.5 on central control point.

Second spline is created with fit points: 6,2 8,4 10,2 with vertical start and end tangent.
Then copied and applied fit tolerance of 1 for fit points.

Third spline is created with fit points: 10,2 12,4 14,2 with horizontal start and end tangent.

Fourth and fifth spline are correctly drawn by QCAD.

Link to bitmap (converted to png) export:
External Link

Versions
QCAD version: 3.13.1.0
Date: Mar 17 2016
Qt version: 4.8.4
Compiler version: gcc 4.4.3
Build Date: Mar 17 2016
Revision:
Architecture: x86_64
OS: Linux
OS version: Unknown

Tools to add control points to existing splines and remove control points.

Hi,

from time to time I need to place a circle etc precisely between two entity’s - what is a lot of construction work to get it correct. With the new “Info tool “Distance Entity to Entity” we have already the base for a new snap tool which could help to get rid of the time consuming construction process in cases like this. I would appreciate to get a new snap tool which is able to figure out the shortest distance between to entity’s and then will snap to the middle of it.

Pic 1: Given situation
Pic 2: Result after using this new snap tool

Would it make also cense to have a second new snap tool which works opposite for the furthermost distance between two entity’s?

As we all know - from time to time - it is a lot of work to prepare a part of a drawing for a hatch.
To get rid of one of the basic task (cutting lines along the desired hatch boundary) it would be nice to have an add-on - or what ever - what would cut ALL intersection in a drawing (or just on one layer, or just based on a selection etc.) with just a mouse click. Then it would be much faster and easier to do the selection for the hatch boundaries.
The user could decide to make it directly in his drawing or he like to duplicate the drawing to an extra layer where this function will be used ....

Clive mentioned on this:
Maybe a tool like this could be an additional ‘Snap’ selection option - select all snap intersections or select snap intersections within a boundary! then as you suggest ‘cut’ at the intersection points.

See also:
https://www.qcad.org/rsforum/posting.php?mode=reply&f=32&t=6211

I would like to get a shortkey like ‘+’ to rotate text at 90° clockwise.

As an old professional “documentation writer and user inteface designer” but IMHO, I’m not convinced that the “Application preferences” are correctly organised for ease of understanding and using them.
These settings are organised in 2 levels. Some of the first levels have their own settings (e.g. “Graphics view”) while most others don’t (e.g. “Load/save”). May I humbly suggest some consistency rules :
- no sub-level if there is only one subject
- no items on main level if there are already 1 or more sub-level(s).
For instance :
- sub-level “Default Dimension settings” under “Dimension” is the only sub-level : then move these items under main level “Dimension” and suppress the sub-level ;
- the items under “Graphics view” main level (with several sub-levels)could be in a sub-level named “General” ;
Actually, “Graphics view” main level is the only one which has both its own items and sub-levels )) ?

Source:
https://www.qcad.org/rsforum/viewtopic.php?f=31&t=4752

According to the changelog for version 3.9.3 the info tools and coordinate display are tied to the current drawing dimensions. For much of my use I prefer to have the dimensions format different. The main reason is that my customers want to see the format in fractions, but when I am drawing I’d rather see the decimal format to make sure what I am drawing is accurate. So I’d really be interested in seeing a separate full configuration of the display and info coordinates.

My request is that all selected entities stay selected after isometric projection, this would be useful for example if you need to modify the projection further after placing!
Maybe an extra button could be added in the ISO options?

It would be nice to have the Selection Filter also present in the Menu / Selection List

Please see last few posts here:

http://www.qcad.org/rsforum/viewtopic.php?f=32&t=3227&p=11777#p11777

This would be nice.
It will save a lot mouse - keypad changes for me.

3.0.8.
Bug Report or Feature Request ..... I’m not sure!

If I use the mouse-pointer in the Scale tool I’m not able to do an inversely proportional scale.
x - y locked or unlocked doesn’t matter in combine with the mouse pointer ...

Now - after enjoying the great new “Scale” option for Dimensioning I like to ask for the same scale option for the “Info tools”.
It would be really nice to have more flexibility (without a pocket-calculator) in reading and displaying the Info tool results.

In a medium complex drawing it may be too much details to have all layers in a drawing visible at once.

Instead a number of views would be created that saves not only zoom level and position but also what layers are visible and not (as appropriate for the purpose of that particular view). This is very cumbersome (to the extent it is not really realistic) to achieve today and requires a lot of duplication of both model and layers.

The advantage of adding this is the ability to have only one model (with multiple views) and avoid duplication of work and the risk of inconsistency inherent with many copies of the model.

As a further (and natural extension to this) would be the ability to used this functionality with view-ports to be able to create (possibly many) paper-spaces from a single model. This would however require view-ports to be aware of what view they are a window into. A single change in the model would then propagate to all defined view-ports and paper-spaces.

Not really a bug I suppose but the save as.dgn file format is missing in snapshot 3.0.8 release.

Will this be available again soon?

Modify - Round - Click polyline - round all corners

Add support to draw revision clouds or convert polylines, ellipses, circles to revision clouds.