Search found 2524 matches

by Husky
Thu Sep 19, 2019 6:45 pm
Forum: QCAD 'How Do I' Questions
Topic: DI - shortening ARC
Replies: 10
Views: 108

Re: DI - shortening ARC

And where can read about the markers and their meaning? I read it in the QCAD Book ... e_surprised How to swap the meaning of the markers? With the Reverse (RV) tool. But that is pretty irrelevant for CAD. If the drawing is meant for further CAM processing then we have a different story ... :wink: ...
by Husky
Thu Sep 19, 2019 6:22 pm
Forum: QCAD 'How Do I' Questions
Topic: changing/modifying dimension
Replies: 9
Views: 117

Re: changing/modifying dimension

Krischu wrote:
Thu Sep 19, 2019 12:15 pm
Thanks. Wasn't aware of the meaning of the blue square points. Is there a subsumption of these selection "handles" (points, square blue, red, round etc.)?
They are called "Reference Points".
by Husky
Thu Sep 19, 2019 9:25 am
Forum: QCAD 'How Do I' Questions
Topic: constructing a round using a circle with two tangential points
Replies: 19
Views: 270

Re: constructing a round using a circle with two tangential points

I saw that the bug already has been fixed. Hoping the fix already being included in the recent snapshot I downloaded that one (3.23.0.2). But the problem still exists (ct2.dxf) - husky's example). A already released version will never undergo a change. 3.23.0.2 was released 9 days ago. With a bit o...
by Husky
Wed Sep 18, 2019 11:05 pm
Forum: QCAD Troubleshooting and Problems
Topic: How can I close this loop?
Replies: 4
Views: 91

Re: How can I close this loop?

Thanks Husky, I forgot to check for those Zero length entities, however duplicates are not being found: (Perhaps I deleted them already in all my futzing around.) Nope - there are still present. Please make sure Ignore Layer and Ignore Direction is checked and don't forget to delete them. Same with...
by Husky
Wed Sep 18, 2019 9:51 am
Forum: QCAD 'How Do I' Questions
Topic: constructing a round using a circle with two tangential points
Replies: 19
Views: 270

Re: constructing a round using a circle with two tangential points

Thanks for testing!
TSG wrote:
Wed Sep 18, 2019 9:06 am
Couldn't found any difference between the situations.
Both situation are exactly the same (copy). Difference is only the location. e_surprised

CT2 behaves differently simply based on where it is used. Thomas, you expected already a bug - will you file a bug report?
by Husky
Wed Sep 18, 2019 1:07 am
Forum: QCAD Troubleshooting and Problems
Topic: How can I close this loop?
Replies: 4
Views: 91

Re: How can I close this loop?

The Hatch tool is "confused" because the shape has double lines. Remove those duplicates (2) with "Detect Duplicates" tool and try the Hatch tool again.

Also is a Zero length entity in that drawing which should be removed .... :wink:
by Husky
Tue Sep 17, 2019 11:36 pm
Forum: QCAD 'How Do I' Questions
Topic: constructing a round using a circle with two tangential points
Replies: 19
Views: 270

Re: constructing a round using a circle with two tangential points

Interesting! :shock: Guys - please do me a favor: After you mentioned it doesn't works (and it was flawless working for me!) I tested a bit and discovert something interesting. I won't tell you now the result .... This dxf has two identical situation. Please test on each on them what I posted as sol...
by Husky
Tue Sep 17, 2019 8:08 pm
Forum: QCAD 'How Do I' Questions
Topic: constructing a round using a circle with two tangential points
Replies: 19
Views: 270

Re: constructing a round using a circle with two tangential points

This doesn't seem to work. I'm asked for first line or circle, second line or circle and when being asked for "point on circle line" it doesn't snap at the endpoint. The CT2 tool is built to solve the task easily without auxiliary lines. Try this click order: Husky-2019.09.17-02.png If it still not...
by Husky
Tue Sep 17, 2019 7:26 pm
Forum: QCAD 'How Do I' Questions
Topic: DI - shortening ARC
Replies: 10
Views: 108

Re: DI - shortening ARC

Krischu wrote:
Tue Sep 17, 2019 2:02 pm
Now I want to shorten the total length of the arc to 2.8 with the green line pieces following the endpoints of that arc.
Should 2.8 be the length or the cord of that arc? Can you attache an example dxf of this situation?
by Husky
Tue Sep 17, 2019 7:07 pm
Forum: QCAD 'How Do I' Questions
Topic: DI - shortening ARC
Replies: 10
Views: 108

Re: DI - shortening ARC

Is it correct to select the entity (arc) and then choose DI? DI doesn't needs a previously selection. Just launch DI, select the entity which has do be divided and watch the mouse pointer - it will partly change to a dash dash point line which indicates the divide (or cut) position. That is as usua...
by Husky
Tue Sep 17, 2019 8:32 am
Forum: QCAD Professional
Topic: fichier autocad 2018
Replies: 3
Views: 85

Re: fichier autocad 2018

Salut, dépend du fichier AC. Est-ce un dessin en 2D? Si ce n'est pas le cas et qu'il s'agit d'une 3D, il n'y a aucune chance de la charger correctement avec QCAD. Si vous êtes en mesure de publier le fichier AC - ou confidentiel, vous pouvez m'envoyer un MP - je le testerai avec la version la plus r...
by Husky
Mon Sep 16, 2019 9:10 pm
Forum: QCAD 'Script Add-On & Plug-in challenge' - Work in Progress
Topic: Reset Origin
Replies: 5
Views: 170

Re: Reset Origin

CVH wrote:
Mon Sep 16, 2019 9:10 am
It is not correct to enter identical questions twice in different sub forums.
CVH wrote:
Mon Sep 16, 2019 9:10 am
I am going to report this thread for deletion.
I don't think that is an identical question. Yes, it is related to the same issue but not identical. Lack of CAD related terminology is no reason to delete anything.
by Husky
Mon Sep 16, 2019 6:48 am
Forum: QCAD 'How Do I' Questions
Topic: Where is the "Option Tool Bar?
Replies: 1
Views: 58

Re: Where is the "Option Tool Bar?

Choose Edit > Paste. Before you position the selection, enable the option "To current layer" In the option tool bar. Where do you find the "Option Tool Bar" to choose "To current layer"? With launching the Paste tool an option bar will automatically pop up on the top of your drawing area (Model_Spa...
by Husky
Mon Sep 16, 2019 5:05 am
Forum: QCAD 'Script Add-On & Plug-in challenge' - Work in Progress
Topic: Reset Origin
Replies: 5
Views: 170

Re: Reset Origin

ljbuller wrote:
Mon Sep 16, 2019 4:12 am
Thank you for the link.
I will check out UCS.js. Is this the add in you were referring to?
Yes.
by Husky
Sun Sep 15, 2019 11:04 pm
Forum: QCAD 'Script Add-On & Plug-in challenge' - Work in Progress
Topic: Reset Origin
Replies: 5
Views: 170

Re: Reset Origin

???

I mentioned to you that there is already a solution. In what way is your new request different to the already existing add-in?

viewtopic.php?f=107&t=5067&p=18700&hili ... ero#p18700

Go to advanced search