[solved] Import Points with Labels - add properties to the point

Please use this forum to post feedback and suggestions related to QCAD.

Moderator: andrew

Post Reply
tomek
Junior Member
Posts: 13
Joined: Mon Jul 13, 2020 1:23 pm
Location: Czech Republic

[solved] Import Points with Labels - add properties to the point

Post by tomek » Fri Oct 01, 2021 12:37 pm

Hi,
would it be possible to extend the tool for importing points with a label so that when importing points into the drawing (as it is now), the attributes of the point are taken from the csv file and written to the point's own properties? See attachment. This would extend the functionality of the tool and I assume that it would also lay the foundation for the possible re-export of such points from the drawing to a csv file, including all the details. Thank you for your helpfulness.
Tomek.
Attachments
QCAD_AttribPoints.PNG
QCAD_AttribPoints.PNG (98.11 KiB) Viewed 5675 times
Last edited by tomek on Tue Oct 19, 2021 5:55 pm, edited 1 time in total.
QCADpro 3.26.4.7 / Win10pro 64 bit and FedoraWorkstation_32 64 bit

CVH
Premier Member
Posts: 3364
Joined: Wed Sep 27, 2017 4:17 pm

Re: Import Points with Labels - add properties to the point

Post by CVH » Fri Oct 01, 2021 12:44 pm

Tomek,

You can always file a feature request here:
https://www.ribbonsoft.com/bugtracker/

I like your proposal, I'll vote for it. :wink:

Regards,
CVH

tomek
Junior Member
Posts: 13
Joined: Mon Jul 13, 2020 1:23 pm
Location: Czech Republic

Re: [solved] Import Points with Labels - add properties to the point

Post by tomek » Tue Oct 19, 2021 5:57 pm

Hi,
Thanks for the tip. I added a feature request to the bugtracker.
Tomek.
QCADpro 3.26.4.7 / Win10pro 64 bit and FedoraWorkstation_32 64 bit

Post Reply

Return to “QCAD Suggestions and Feedback”