Feature: Especially for Inch/Imperial users more choices for measured value (e.g. inch + cm on the same line)
Posted: Wed Nov 19, 2025 9:15 am
For dimensions there's a "measured value":
I would like to be able to set at least two units for that measured value, e.g.:
So a resulting visible label of:
<-------------------- 16" (40.64 cm) +- ----------------->
Regardless of the units of the drawing itself.
What I find myself doing is manually overriding the "measured value" to do the same thing, with the danger that it becomes inaccurate.
A check function for accuracy of the measured value vs. display value seems too fragile to suggest.
- Capture.JPG (7.91 KiB) Viewed 2000 times
- Measured value display type one: inch
- Measured value display type two: cm
So a resulting visible label of:
<-------------------- 16" (40.64 cm) +- ----------------->
Regardless of the units of the drawing itself.
What I find myself doing is manually overriding the "measured value" to do the same thing, with the danger that it becomes inaccurate.
A check function for accuracy of the measured value vs. display value seems too fragile to suggest.