Custom Line weight
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Custom Line weight
I need to set the line weight to 0.01MM, however there does not seem to be any way to do this. Can the line weight be set to something other than the ones that come with qcad. I need these small weights to generate laser cutting drawings.
Thanks.
Thanks.
Re: Custom Line weight
Whats about 0.00? That should work as well.ov10fac wrote:I need these small weights to generate laser cutting drawings.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Custom Line weight
I tired the 00 weight, but I need weight of .01 and that is not offered, nor is there any place to let me insert a valuel
Re: Custom Line weight
Hi is this for Epilog machines?
Re: Custom Line weight
Not sure what an Epilog machine is. I send the drawing to a company on-line from a company named Ponoko. They need all the laser cut lines set to .01 MM.
Thanks.
Thanks.
Re: Custom Line weight
Do they accept a DXF / DWG file for processing? The problem is that lineweights of 0.01mm are not supported by the DXF/DWG format at all (which is the reason QCAD does not support such custom line weights either).ov10fac wrote:They need all the laser cut lines set to .01 MM.
Re: Custom Line weight
Yes, they do support dxf format. i will check with the company to see what the dxf format rules are. Thank you
Re: Custom Line weight
I'm pretty confident they will accept 0.00 ...ov10fac wrote:Yes, they do support dxf format. i will check with the company to see what the dxf format rules are. Thank you
Please check http://www.ponoko.com/starter-kits/autocad
@Andrew: Could you please whitelist this link - thanks.
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Custom Line weight
Ahh light bulb. I've been sending them inkscape drawings, which need line width of .01. I just assumed the same for dxf.
Guess I should have read all the documentation. Many thanks.
John
Guess I should have read all the documentation. Many thanks.
John