Hi
Versions
QCAD version: 3.18.1.0
Date: Oct 4 2017
Qt version: 5.8.0
Compiler version: gcc 4.8.1
Build Date: Oct 4 2017
Revision: 24e23aa782cf917916212eb27798f35ce96f9248
Architecture: x86_64
OS: Linux
OS version: Centos 7
When drawing a Circle 2p from the center on the left hand circle (0,0) out the upper line at 60 deg, it fails to find the intersect of the line and the two circles along the line. When it reaches the small circle at the end of the line it finds the intersect and end points but displays a circle outward from those points. Similar problem coming back from the end of the line to the two circles.
Parts of this drawing were created in this model and others, the large arc on the right and the two lines extending from there to the left were brought in as a polyline by copy with reference from another model here they were exploded twice and then the part of the polyline that was in the same area as the 2.6" dia. circle were deleted.
This issue has been present in all of the derived models from the first.
Thanks
Jim
[Solved] Odd occurance when creating circle 2 points
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Attach drawing files and screenshots.
Post one question per topic.
[Solved] Odd occurance when creating circle 2 points
Last edited by jamby on Wed Nov 06, 2019 5:48 am, edited 1 time in total.
Re: Odd occurance when creating circle 2 points
Hi Jim,
If you start a 2P line in the center of the circle and restrict it with 60 degrees you cant tell the tool where the intersection is with a snap. You could use auxiliary lines but that would also be an over kill ...
Snap to end horizontal line - fails because the end isn't the end below 60 degrees.
Snap to intersection - how to determine the intersection,
Lengths of 60 degree line - hmmm, what is the accurate lengths ...
Long story short: In cases like this one it would be the easiest way to create a "non fitting" (to short / to long) line and trim it afterward with "Trim Both". That gives you an perfect intersection of both lines.
IMPORTANT note!
Your drawing has 3D information what makes me thinking it wasn't entirely created in QCAD. That is a recipe for trouble. To make sure that everything works in QCAD as expected flatten the drawing below Menu/Misc/Modify/Flatten drawing to 2D![Wink :wink:](./images/smilies/icon_wink.gif)
it is not really a CAD issue - the tool has not all required information.
If you start a 2P line in the center of the circle and restrict it with 60 degrees you cant tell the tool where the intersection is with a snap. You could use auxiliary lines but that would also be an over kill ...
Snap to end horizontal line - fails because the end isn't the end below 60 degrees.
Snap to intersection - how to determine the intersection,
Lengths of 60 degree line - hmmm, what is the accurate lengths ...
Long story short: In cases like this one it would be the easiest way to create a "non fitting" (to short / to long) line and trim it afterward with "Trim Both". That gives you an perfect intersection of both lines.
IMPORTANT note!
Your drawing has 3D information what makes me thinking it wasn't entirely created in QCAD. That is a recipe for trouble. To make sure that everything works in QCAD as expected flatten the drawing below Menu/Misc/Modify/Flatten drawing to 2D
![Wink :wink:](./images/smilies/icon_wink.gif)
Work smart, not hard: QCad Pro
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Win10/64, QcadPro, QcadCam version: Current.
If a thread is considered as "solved" please change the title of the first post to "[solved] Title..."
Re: Odd occurance when creating circle 2 points
Indeed: Z is not zero is the issue here.
The circle added at the intersection of the two lines is not a circle 2P.
This is a Circle Center, Point. (Red)
But that doesn't matter here.
To draw a Circle Center Point with as reference the far intersection of the two lines (Orange):
Draw / Circle / Center, Point CI
Select centerpoint.
Change snap to Intersection Manual SY.
Select both lines that intersect. (Yellow)
Intersection Manual is not an auto snapper.
Regards,
CVH
The green intersections will be found correctly when 2D.Husky wrote: ↑Sun Nov 03, 2019 8:39 pmIMPORTANT note!
Your drawing has 3D information what makes me thinking it wasn't entirely created in QCAD. That is a recipe for trouble. To make sure that everything works in QCAD as expected flatten the drawing below Menu/Misc/Modify/Flatten drawing to 2D :wink:
The circle added at the intersection of the two lines is not a circle 2P.
This is a Circle Center, Point. (Red)
But that doesn't matter here.
To draw a Circle Center Point with as reference the far intersection of the two lines (Orange):
Draw / Circle / Center, Point CI
Select centerpoint.
Change snap to Intersection Manual SY.
Select both lines that intersect. (Yellow)
Intersection Manual is not an auto snapper.
Regards,
CVH
Re: Odd occurance when creating circle 2 points
Wow
Who'd a thunk.... Yes using flatten (took awhile to find even with the map) all was good. Not sure if this was the same line of models that I read in a set of points from a file but that's the only thing I can think of that might have introduced a not 2D element. The file was X.xx,Y.yy but who knows.
This is the final outcome I was looking for on the finished profile.
Thanks again
Jim
Who'd a thunk.... Yes using flatten (took awhile to find even with the map) all was good. Not sure if this was the same line of models that I read in a set of points from a file but that's the only thing I can think of that might have introduced a not 2D element. The file was X.xx,Y.yy but who knows.
This is the final outcome I was looking for on the finished profile.
Thanks again
Jim