hi from perth australia

Post to this forum to introduce yourself to this forum if you are new here. You might want to include some information about the work you are doing or planning to do with QCAD.

Moderator: andrew

Post Reply
Registered Member
Posts: 2
Joined: Sun Feb 18, 2018 7:39 am

hi from perth australia

Post by pencilcaddy » Sun Feb 18, 2018 7:49 am

Hi from perth Australia,
i am a fitter machinist by trade and want to learn qcad to enhance my skillset for work and be able to do my own work down the track

User avatar
Posts: 402
Joined: Tue Mar 24, 2009 9:48 pm

Re: hi from perth australia

Post by J-J » Sun Feb 18, 2018 9:57 pm

Hi pencilcaddy
Welcome to the forum. You will see that QCAD is quite intuitive to master, and if you should encounter any obstacle, you will find many people to help on the forum. :wink:

User avatar
Moderator/Drawing Help/Testing
Posts: 2290
Joined: Wed May 11, 2011 9:25 am
Location: USA

Re: hi from perth australia

Post by Husky » Mon Feb 19, 2018 1:20 am

Hi pencilcaddy - welcome to the QCAD Forum. :D
Work smart, not hard: QCad Pro

Post Reply

Return to “Introduce Yourself”