I want to define some layers for automatic CAM generation and I can't find where to do this. Seems that the things has changed and I can't find the "Configuration Options (per layer)" anymore:
It is possible to create templates for automatic CAM generation in QCAD/CAM? I want for example that all the shapes from the layer "Contour_14" to be cut on outside with a 14mm deep cut.
Best regards.
Layer configuration for CAM?
Moderator: andrew
Forum rules
Always indicate your operating system and QCAD version.
Indicate the post processor used.
Attach drawing files and screenshots.
Post one question per topic.
Always indicate your operating system and QCAD version.
Indicate the post processor used.
Attach drawing files and screenshots.
Post one question per topic.
Re: Layer configuration for CAM?
This option is not available in the new QCAD/CAM procedure using tools and toolpaths.
To achieve the same, you can select all contours on any given layer and create a toolpath with the desired properties for those selected contours.
For a tutorial on QCAD/CAM basic usage, please refer to:
https://www.qcad.org/en/tutorial-qcad-cam
To achieve the same, you can select all contours on any given layer and create a toolpath with the desired properties for those selected contours.
For a tutorial on QCAD/CAM basic usage, please refer to:
https://www.qcad.org/en/tutorial-qcad-cam
Re: Layer configuration for CAM?
It is possible to add in a future version of QCAD/CAM Toolpath Templates like the ones from Vcarve https://docs.vectric.com/docs/V10.0/VCa ... -templates
https://docs.vectric.com/docs/V9.0/Aspi ... lates.html
https://docs.vectric.com/docs/V9.0/Aspi ... lates.html