Free Hatch Patterns

[John Hyslop]

Hi All
I've added headers to all my hatch patterns the header contains this text as suggested by CVH
;By John Hyslop
;Developed in inch as imperial QCAD3 pattern
Here is a fullset of all I have done so far if using Metric download the metric set.. Enjoy
The Dotted Circle Hatches are made with short lines.. not the best practice but ok for representations..
Some Pattern Updates are now on Page 4 of this topic

[John Hyslop]

Seamless MAZE-02 Coming soon

[CVH]

Forgot the LATTICE-04 Ortho....

You can use 0 (zero) for dashes 1-6 instead of a positive number.
That would render to a dot.
Positive is the length ON.
Negative is the length OFF.

dashes 5,-3,0,-1,0,-1 would be:
bar(5long), space(3), dot, space(1), dot, space(1)

Regards,
CVH

[John Hyslop]

Qcad Metric Hatch Patterns
Some Updated Patterns are now on Page 4 of this topic

[John Hyslop]

MAZE-02 Seamless in Imperial... Metric File to Follow

[John Hyslop]

MAZE-02 Seamless in Metric

[John Hyslop]

Hatch Patterns BOXJOIN-01,BOXJOIN-02,HEXJOIN-01,HEXJOIN-02
Metric & Imperial Downloads

[John Hyslop]

LATTICE-05 & LATTICE-06
In Metric & Imperial

[John Hyslop]

Australian REDBACK Spider

[John Hyslop]

TRIANGLE & BOX OVERLAP PATTERNS in Metric & Imperial

[CVH]

LATTICE-04 [ see angle note on screenshot ] to make it orthogonal..
If you require a more accurate angle the true one is 26.565051deg :-)

And the not turncated angle would be:
ATAN2(2,1)

Do you see it John? :D
Tiles2Patterns...Closing in on it.

Cheers
CVH

[John Hyslop]

Hi CVH
I private messaged you to keep this area clear for hatch patterns..
Cheers john

[John Hyslop]

SCAFFOLD PATTERN HAS BEEN UPDATED, PLEASE SEE POST DATED 11/01/20

This Pattern might be handy for builders and architects.
Note: if your drawing is scaled 1:1 Consider setting a high scale
eg. 200 then adjust it to get the approximate size..
Scaled at 200 will result in the platform sizes below:-
Metric = 2540mm Long
Inch = 100" Long

This Pattern is not intended to be an accurate way of drawing
scaffolding , it is for quick representational purposes only

Metric & Imperial Files Included....

Cheers
John

[John Hyslop]

Here's another 2 Hatch Patterns BLOCKS-01 & BLOCKS-02 in Metric & Inch
These could be exploded and used as garden screens cut from corten
steel " steel that naturally rusts " some of my other patterns can
be used for this purpose also eg some of the Lattice patterns..

[John Hyslop]

XMASTREE PATTERNS Metric & Imperial